Unit of competency Outline

Date retreived
22/07/2026 4:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Joint metallic conductor cable in access network

Joint metallic conductor cable in access network

Unit of competency
National Code
ICTCBL215
State Code
AWE86
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes skills and knowledge required to joint metallic conductor cable on the service provider side of the network boundary in communications applications including digital and analog, telephony, data, video, digital broadcasting, computer networks, local area networks (LAN), wide area networks (WAN) and multimedia.It applies to individuals working in technical roles who joint metallic conductor cable for indoor and outdoor installations on new installations and cable upgrades, and maintain infrastructure in domestic, commercial and industrial situations for service providers and asset owners.All client cabling work in the telecommunications, fire, security and data industries must be performed by a registered cabler. All cablers are required to register with an Australian Communications and Media (ACMA) accredited registrar.
Notes
Elements and Performance Criteria
1. Prepare for jointing metallic conductor cable for access network
  • 1.1 Prepare for given work according to relevant legislation, codes, regulations and standards
  • 1.2 Arrange access to site according to required procedure
  • 1.3 Inform appropriate personnel ofexisting and potential hazards on worksite
  • 1.4 Review siteplans and documentation
  • 1.5 Select cable type and appropriate connectors for cable joint
  • 1.6 Set uptools and equipment, and materialsrequired for safe work practice
  • 1.7 Obtain information on location of other services from relevant authorities
2. Joint metallic conductor cable for access network
  • 2.1 Joint metallic cable following work health and safety (WHS) and environmental requirements
  • 2.2 Perform relevant cable tests to ensure joint complies with site specifications, manufacturer’s specifications, and relevant legislation, codes, regulations and standards
  • 2.3 Rectify any cable faults
  • 2.4 Record cable tests and any modifications required
  • 2.5 Label and tag cable joint according to enterprise guidelines and industry practice
3. Protect and alarm cable
  • 3.1 Pressurise cable and check for any leakage
  • 3.2 Reconnect alarms, if applicable, according to enterprise guidelines
  • 3.3 Remove waste and debris from worksite and dispose of according to environmental requirements to maintain safe worksite conditions
4. Complete records and clean up site
  • 4.1 Complete required records including alterations and notify client
  • 4.2 Reinstate site according to client and company requirements
  • 4.3 Present all records to appropriate personnel and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
D3312 ICTCBL2135A Joint metallic conductor cable in access network Unit of competency
Replaced By
State Code National Code Title Type
OBA66 ICTCBL254 Joint metallic conductor cable in access network Unit of competency