Unit of competency Outline

Date retreived
22/07/2026 2:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use and maintain electrical test equipment in an automotive workplace

Use and maintain electrical test equipment in an automotive workplace

Unit of competency
National Code
AURETK002
State Code
AXE04
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
18
Description
This unit describes the performance outcomes required to select, use and maintain electrical test equipment used in an automotive workplace for the purpose of identifying, diagnosing and rectifying electrical and electronic faults in vehicles or machinery.It applies to those working in the automotive service and repair industry. The electrical systems and components include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Select and use electrical test equipment
  • 1.1 Job requirements are determined according to workplace instructions
  • 1.2 Electrical test equipment is identified and selected to meet job requirements
  • 1.3 Electrical test equipment is checked and calibrated according to manufacturer specifications and workplace procedures
  • 1.4 Personal protective equipment (PPE) required for the work is selected and checked before use
  • 1.5 Hazards associated with the work are identified and risks are managed
  • 1.6 Electrical test equipment is used according to manufacturer specifications and safety requirements
  • 1.7 Electrical circuits are tested according to workplace procedures and without causing damage to systems and components
2. Service, maintain and store electrical test equipment
  • 2.1 Electrical test equipment is serviced, calibrated and maintained within scope of responsibility according to manufacturer specifications and workplace procedures
  • 2.2 Calibration inspection schedules and procedures are determined to ensure reliable and accurate operation
  • 2.3 Damaged, faulty or inaccurate electrical test equipment is tagged and isolated for repair or replacement, and reported according to workplace procedures
3. Complete work processes
  • 3.1 Electrical test equipment is cleaned, checked and stored ready for use according to workplace procedures
  • 3.2 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF081 AURETK2002 Use and maintain automotive electrical test equipment Unit of competency