Unit of competency Outline

Date retreived
22/07/2026 8:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform advanced welding using manual metal arc welding process

Perform advanced welding using manual metal arc welding process

Unit of competency
National Code
MEM05016
State Code
OAW96
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
18/04/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
18/04/2021
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to carry out advanced welding using manual metal arc welding (MMAW). Welds are associated with a range of structural sections and/or plate and/or pipe for general fabrication. Weld quality would typically conform to AS 1554 Structural Purpose or equivalent.Where advanced manual thermal cutting, gouging and shaping is required unit MEM05008 Perform advanced manual thermal cutting, gouging and shaping should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare materials for welding
  • 2.1 Prepare materials to achieve the required weld requirements
  • 2.2 Assemble/align materials to specification, where required
3 Select, assemble and set up welding equipment and consumables
  • 3.1 Identify and select welding equipment and electrodes, accessories and consumables appropriate to the material
  • 3.2 Assemble and set up AC or DC welding equipment
4 Minimise and rectify distortion
  • 4.1 Apply appropriate distortion prevention measures
  • 4.2 Rectify any distortion using appropriate techniques
5 Weld joints to specifications using MMAW
  • 5.1 Ensure weld deposit is to specifications
  • 5.2 Clean joints to specifications
6 Ensure weld conformance
  • 6.1 Inspect weld joints visually for conformance to specifications
  • 6.2 Rectify any weld defects with minimum loss of sound metal using correct techniques and tools
  • 6.3 Complete weld records, where required
No information
No information
Replaces
State Code National Code Title Type
W5298 MEM05016C Perform advanced welding using manual metal arc welding process Unit of competency
Replaced By
State Code National Code Title Type
OEX04 MEM05072 Perform advanced welding using manual metal arc welding process Unit of competency