Unit of competency Outline

Date retreived
23/07/2026 5:16 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install telecommunications network equipment

Install telecommunications network equipment

Unit of competency
National Code
ICTTEN302
State Code
AWD56
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
80
Description
This unit describes the skills and knowledge required to effectively install and test telecommunications network equipment. It includes processes for checking plans, obtaining equipment, and handling equipment and supplies.It applies to field officers, technicians or technical supervisors employed by carriers, contractors or other service providers, who install new, or replace old, switching, transmission and radio networks and various transmission paths - including cable, optical fibre, radio, microwave and satellite telecommunications equipment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan for installation of telecommunications network equipment
  • 1.1 Prepare for given work according to relevant work health and safety (WHS) and environmental requirements
  • 1.2 Notify customer to arrange site access if necessary
  • 1.3 Assess existing and potential site hazards
  • 1.4 Verify location of proposed network equipment installation according to appropriate plans obtained from authorised personnel
  • 1.5 Develop installation plans to ensure minimal workplace disruption and according to relevant legislation, codes, regulations and standards
  • 1.6 Obtain tools and test equipment required for safe work practice
  • 1.7 Notify affected parties of possible network outage, if required
2. Install network hardware and cabling
  • 2.1 Install network equipment according to the plan and manufacturer’s instructions, using safe industry practices
  • 2.2 Insert equipment cards and modules
  • 2.3 Install all interconnecting cables to specification
  • 2.4 Confirm service interruption is within limits agreed with customer
  • 2.5 Document all installation drawings for customer
3. Install equipment accessories
  • 3.1 Install alarms according to instruction manuals and specifications
  • 3.2 Install operations administration and maintenance system according to specification
  • 3.3 Install communication facilities for operational staff according to specification, taking into account any special needs of the site and operational staff
  • 3.4 Install operator communication facilities according to needs and specifications
4. Configure and test system
  • 4.1 Install software and configuration instructions according to system specifications, if required
  • 4.2 Test to verify system performance according to customer requirements
  • 4.3 Recommend any possible changes and confirm with customer
  • 4.4 Record all test results
5. Clean up worksite and complete documentation
  • 5.1 Remove and dispose of installation waste and debris from worksite according to environmental requirements
  • 5.2 Restore changes made to work area during installation, to customer’s satisfaction
  • 5.3 Complete all installation documents and present to customer
  • 5.4 Declare asset ready for commissioning and integration
  • 5.5 Notify customer and obtain sign-off
No information
No information
Replaces
State Code National Code Title Type
D3444 ICTTEN3056A Install telecommunications network equipment Unit of competency
Replaced By
State Code National Code Title Type
OBA41 ICTTEN312 Install telecommunications network equipment Unit of competency