Unit of competency Outline

Date retreived
22/07/2026 6:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct bitumen tanker operations

Conduct bitumen tanker operations

Unit of competency
National Code
RIICBS312D
State Code
WH065
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
52
Description
This unit describes a participant’s skills and knowledge required to conduct bitumen tanker operations in Civil Construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for bitumen tanker operations
  • 1.1 Access, interpret and apply bitumen tanker operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.6 Confirm and apply environmental protection and safety requirements
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Set up tanker for operation
  • 2.1 Carry out pre-operational checks on bitumen tanker
  • 2.2 Fill ancillary tanks and ensure adequate materials are available to perform tanker operations
  • 2.3 Check tanks to prevent contamination
  • 2.4 Obtain load details, including correct amount of any additives
3. Load tanker
  • 3.1 Carry out pre-start and start-up procedures
  • 3.2 Drive and operate tanker
  • 3.3 Check previous load details for compatibility
  • 3.4 Load tank with the prescribed amount of material
  • 3.5 Add and mix additives to specifications
  • 3.6 Check temperature of the material and ensure compliance with manufacturer’s specifications
  • 3.7 Measure, calculate and record material quantities and additives
  • 3.8 Heat materials in accordance with manufacturer’s/suppliers’ instructions
4. Transfer materials
  • 4.1 Set up transfer site
  • 4.2 Confirm transfer procedures with depot supervisor/sprayer driver
  • 4.3 Transfer materials
  • 4.4 Record details of transferred materials
5. Empty tanker
  • 5.1 Empty tank into storage or waste
  • 5.2 Clean tank interior
6. Carry out operator maintenance
  • 6.1 Prepare machine for maintenance
  • 6.2 Conduct inspection and fault finding
  • 6.3 Carry out scheduled maintenance tasks
  • 6.4 Process written maintenance records
7. Clean up
  • 7.1 Clear work area and dispose of or recycle materials
  • 7.2 Clean, check, maintain and store plant, tools and equipment
  • 7.3 Carry out housekeeping requirements
No information
No information
Replaces
State Code National Code Title Type
WB654 RIICBS312A Conduct bitumen tanker operations Unit of competency
Replaced By
State Code National Code Title Type
OBM98 RIICBS312E Conduct bitumen tanker operations Unit of competency