Unit of competency Outline

Date retreived
22/07/2026 6:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install vehicle components

Install vehicle components

Unit of competency
National Code
AUMGTY002
State Code
WH982
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030503 - Vehicle Mechanics
Original Release Date
11/03/2014
Nominal Hours
64
Description
This unit describes the performance outcomes required to mount and install assembled components to a chassis or frame (e.g. vehicle cabin, sleeper or vehicle bodies).It applies to those in an automotive and related component manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Hand tools and equipment are selected and inspected, and faults repaired or reported
  • 1.2 Appropriate lifting equipment is selected and checked for safe operation
  • 1.3 Fasteners are identified from job specifications
  • 1.4 Job information and working drawings are identified, interpreted and confirmed
2. Position and tension components
  • 2.1 Workplace procedures are identified and followed
  • 2.2 Components are matched, positioned and secured according to work instruction and component specifications
  • 2.3 Fasteners are tensioned to specification
  • 2.4 Components are inspected for alignment and quality according to work order and workplace quality standards
3. Hook up systems
  • 3.1 Component service lines are hooked up according to drawings and component specifications
  • 3.2 Completed hook-up is checked against job specifications, and then tested and inspected for quality and operation
4. Complete work processes
  • 4.1 Work area and equipment are cleaned, inspected and maintained according to workplace procedures
  • 4.2 Faulty equipment is identified, tagged and reported
  • 4.3 Work sheets and production schedule are completed and given to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
WE182 AUMGTY3002 Mount and install assembled component to chassis or frame Unit of competency