Unit of competency Outline

Date retreived
22/07/2026 7:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for complex laminating

Set up machine for complex laminating

Unit of competency
National Code
ICPCBF3810
State Code
OBQ87
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
50
Description
This unit describes the skills and knowledge required to set up a machine for a range of complex laminating processes including laminating reel to reel, sheet to reel and reel to sheet.It applies to individuals who prepare material, monitor and run equipment and machinery, and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Identify job specifications
  • 1.2 Set up required printing machinery according to manufacturer specifications
2. Set up reel transportation system
  • 2.1 Set up and adjust unwind reel
  • 2.2 Carry out webbing procedures
  • 2.3 Set up and adjust web control system
  • 2.4 Splice and join reels as required
  • 2.5 Set up and adjust rewind reel and sheeter
3. Set up machine for complex laminating
  • 3.1 Set up and adjust application system cylinder, adhesive application system and binding pressures
  • 3.2 Set up and adjust drying system
4. Set up in-line unit(s)
  • 4.1 Set up minor in-line units for basic processes according to machine requirements and job specifications
  • 4.2 Provide assistance in set-up of major in-line units
5. Conduct sample run
  • 5.1 Operate machine according to manufacturer specifications and enterprise procedures to produce specified sample
  • 5.2 Inspect and test sample as required according to enterprise procedures
  • 5.3 Interpret results and make adjustments according to product and machine specifications as required
No information
No information
Replaces
State Code National Code Title Type
AUN81 ICPCBF381 Set up machine for complex laminating Unit of competency