Unit of competency Outline

Date retreived
23/07/2026 3:28 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for complex laminating

Set up machine for complex laminating

Unit of competency
National Code
ICPCBF381
State Code
AUN81
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
50
Description
This unit describes the skills and knowledge required to set up a machine for a range of complex laminating processes including laminating reel to reel, sheet to reel and reel to sheet.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Job specifications are read and interpreted from job documentation or production control system
  • 1.2 Set-up is planned and carried out correctly in minimum time with minimum wastage
2. Set up reel transportation system
  • 2.1 Unwind reel is set up and adjusted according to job specifications
  • 2.2 Webbing procedures are carried out
  • 2.3 Web control system is set up and adjusted according to job specifications
  • 2.4 Reels are spliced/joined according to job specifications
  • 2.5 Rewind reel is set up and adjusted according to job specifications
  • 2.6 Sheeter is set up and adjusted according to job specifications
3. Set up machine for complex laminating
  • 3.1 Application system cylinder is set up and adjusted according to job specifications
  • 3.2 Adhesive application system is set up and adjusted according to job specifications
  • 3.3 Binding pressures are set up and adjusted according to job specifications
  • 3.4 Drying system is set up and adjusted according to job specifications
4. Set up in-line unit(s)
  • 4.1 Minor in-line printing/converting/binding unit(s) are set up for basic process(es) and adjusted according to machine requirements and job specifications
  • 4.2 Assistance is given in set-up of major in-line printing/converting/binding unit(s)
5. Conduct sample run
  • 5.1 Raw material to be used for sample is organised correctly
  • 5.2 Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures
  • 5.3 Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures
  • 5.4 Results are interpreted to determine adjustment requirements
  • 5.5 Adjustment changes are carried out according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
D3065 ICPCF381C Set up machine for complex laminating Unit of competency
Replaced By
State Code National Code Title Type
OBQ87 ICPCBF3810 Set up machine for complex laminating Unit of competency