Unit of competency Outline

Date retreived
23/07/2026 7:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic collating or inserting (sheet/section)

Set up machine for basic collating or inserting (sheet/section)

Unit of competency
National Code
ICPCBF243
State Code
AUO34
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
40
Description
This unit describes the skills and knowledge required to set up a machine for basic collating, gathering or inserting of sheets or sections, and is appropriate for binding and finishing operations, mail houses and newspapers.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Job specifications are read and interpreted from job documentation or production control system
  • 1.2 Set-up is carried out correctly in minimum time with minimum wastage
  • 1.3 Availability of all job-related components is checked
2. Set up sheet/section system
  • 2.1 Feeder and delivery systems are set up and adjusted according to job specifications
  • 2.2 Double/misfeed detectors are set up according to job specifications
  • 2.3 Sheet/section pick-up, transfer and transportation system is set up and adjusted according to job specifications
  • 2.4 Transfer systems are set up and adjusted according to job specifications
3. Set up machine and conduct sample run
  • 3.1 Collating/inserting system is set up and adjusted according to job specifications
  • 3.2 Material to be used for sample is organised correctly
  • 3.3 Machine is set up and operated to produce a specified sample according to Work Health and Safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
4. Organise sample inspection and/or testing
  • 4.1 Sample is visually inspected and/or tested, or laboratory testing is organised, according to enterprise procedures
  • 4.2 Results are interpreted to determine adjustment requirements
  • 4.3 Adjustments are carried out according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
D3031 ICPCF243C Set up machine for basic collating or inserting (sheet/section) Unit of competency
Replaced By
State Code National Code Title Type
OBP37 ICPCBF2430 Set up machine for basic collating or inserting (sheet/section) Unit of competency