Unit of competency Outline

Date retreived
22/07/2026 3:33 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Handle and prepare bricklaying and blocklaying materials

Handle and prepare bricklaying and blocklaying materials

Unit of competency
National Code
CPCCBL2001
State Code
OCP41
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
16
Description
This unit specifies the skills and knowledge required to safely handle bricklaying and blocklaying materials using manual and mechanical means. It includes sorting, stacking and protecting onsite materials.This unit applies to those who carry out preparatory bricklaying and blocklaying work on new or existing structures. It is suitable for people with basic skills and knowledge who undertake routine work tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 1.2 Read and interpret bricklaying and blocklaying requirements from current plans, specifications and codes.
  • 1.3 Follow relevant information from workplace procedures, workplace safety and environmental documentation.
  • 1.4 Calculate brick and block quantities and materials required for the task.
  • 1.5 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.6 Identify potential hazards and determine and implement control measures.
  • 1.7 Select and check condition of tools and equipment and report damage or faults to appropriate person.
  • 1.8 Check materials against the delivery docket and report damage and inconsistencies to supervisor.
2 Handle, sort and stack materials.
  • 2.1 Prepare work area for loading of materials.
  • 2.2 Identify method of handling and moving onsite materials.
  • 2.3 Follow job instructions to prepare, sort and handle materials.
  • 2.4 Apply safe and effective manual handling techniques when unloading, lifting, moving and loading materials.
  • 2.5 Position materials for ease of access and clear of walkways.
3 Mix bricklaying and blocklaying mortar.
  • 3.1 Set up, level and stabilise cement mixer.
  • 3.2 Conduct a pre-operation check on cement mixer.
  • 3.3 Mix mortar using correct ingredient ratios and process as instructed.
  • 3.4 Confirm the quality and consistency of the mortar with relevant person.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 4.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 4.3 Store, secure and protect tools, equipment and materials following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9318 CPCCBL2001A Handle and prepare bricklaying and blocklaying materials Unit of competency