Unit of competency Outline

Date retreived
22/07/2026 10:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain pneumatic system components

Maintain pneumatic system components

Unit of competency
National Code
MEM18018
State Code
OAU76
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030701 - Mechanical Engineering
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to check pneumatic system components, identify and repair or replace faulty components.Pneumatic system components are identified and inspected and assessed using fluid power principles to predetermined specifications interpreted from data sheets and circuits diagrams.Where straightforward removal/replacement of components from a pneumatic system is required unit MEM18055 Dismantle, replace and assemble engineering components and unit MEM18071 Connect and disconnect fluid conveying system components, should be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Check pneumatic system components
  • 2.1 Identify the characteristics and operational function of each system component
  • 2.2 Inspect and test the operational function of each component
  • 2.3 Assess correct operation of each component against specifications
3 Identify, repair or replace faulty pneumatic system components
  • 3.1 Localise faulty system components and confirm malfunction by inspection and testing using fluid power principles, procedures and safety requirements
  • 3.2 Dismantle faulty system components and repair to manufacturers'/site specifications
  • 3.3 Select replacement parts from appropriate sources
  • 3.4 Reassemble system components and verify for correct operation and test against specifications
  • 3.5 Confirm correct operation of the pneumatic system according to SOPs
  • 3.6 Adopt appropriate follow-up procedures
  • 3.7 Complete service reports
No information
No information
Replaces
State Code National Code Title Type
W5561 MEM18018C Maintain pneumatic system components Unit of competency