Unit of competency Outline

Date retreived
22/07/2026 8:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, refit and adjust bicycle accessories

Remove, refit and adjust bicycle accessories

Unit of competency
National Code
AURBTV101
State Code
OCI96
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to remove, refit and adjust electrical and non-electrical bicycle accessories. The unit involves preparing for the work, selecting and using specialist tools and equipment, inspecting, removing and replacing bicycle accessories according to fitting instructions and manufacturer specifications, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove, refit and adjust bicycle accessories
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Interpret bicycle accessory removal and fitting instructions and check accessory specifications against customer requirements
  • 1.3 Inspect accessories for quality and compare with customer requirements
  • 1.4 Identify hazards associated with the work and manage risks
  • 1.5 Select and check tools and equipment for serviceability
  • 1.6 Prepare work area and plan work to avoid damage to bicycle, minimise waste and use time efficiently
2. Remove accessories
  • 2.1 Identify and check accessories to be removed or repaired according to manufacturer specifications
  • 2.2 Remove accessories in line with planned sequence according to workplace instructions and without causing damage to bicycle frame, other components and accessories
3. Fit, test and adjust accessories
  • 3.1 Determine required positioning of new or repaired accessories regard to operational requirements, aesthetics and customer requirements
  • 3.2 Refit bicycle accessories according to job requirements, workplace procedures, and safety and environmental requirements
  • 3.3 Test and adjust refitted accessories as required according to job requirements and customer requirements
4. Complete work processes
  • 4.1 Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXE33 AURBTV001 Remove, refit and adjust bicycle accessories Unit of competency