Pathway Outline
Date retreived
22/07/2026 8:05 AM AWST
22/07/2026 8:05 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship (Carpentry)
Pre-Apprenticeship (Carpentry)
Pathway
National Code
—
—
State Code
WB43
WB43
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
17/01/2014
17/01/2014
Field of Education
0403 - Building
0403 - Building
Approved Date
10/10/2011
10/10/2011
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
5.00
5.00
Current Release Date
11/11/2021
11/11/2021
Nominal Hours
600
600
Description
This is a pre-apprenticeship program in Carpentry based on the Training Package CPC08 qualification CPC20211. It provides learners with the required competencies for articulating into an apprenticeship program in the same field.
Packaging Rules
1. Core Units
All six (6) units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9435 | CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | 32 | Unit of competency |
| D7350 | CPCCCM1015A | Carry out measurements and calculations | 16 | Unit of competency |
| D7349 | CPCCCM1014A | Conduct workplace communication | 16 | Unit of competency |
| D7348 | CPCCCM1013A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| D7347 | CPCCCM1012A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
2. Groups A to H Elective Units
A minimum of two (2) and a maximum of four (4) elective units may be selected from any of Groups A to G. Up to two (2) unots from any group.
The following outlines ONE example of a training program for this field of work.
Please refer to the Training Package for the full details of available options.
The following outlines ONE example of a training program for this field of work.
Please refer to the Training Package for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WE984 | CPCCCM2006B | Apply basic levelling procedures | 16 | Unit of competency |
| D7345 | CPCCCA2011A | Handle carpentry materials | 16 | Unit of competency |
| WB570 | RIICCM210A | Install trench support | 8 | Unit of competency |
| WE975 | CPCCCA2002B | Use carpentry tools and equipment | 52 | Unit of competency |
| W9411 | CPCCJN3001A | Use static machines | 25 | Unit of competency |
| WE987 | CPCCCM2010B | Work safely at heights | 16 | Unit of competency |
3. Additional units
Additional Units - Pre-apprentices completing the requirements of additional units will receive Statements of Attainment for any additional competencies completed. Select additional units so that the total hours for the program do not exceed 600.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9347 | CPCCCA3008A | Construct eaves | 20 | Unit of competency |
| D7512 | CPCCCA3007B | Construct pitched roofs | 36 | Unit of competency |
| W9339 | CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground | 32 | Unit of competency |
| W9345 | CPCCCA3006A | Erect roof trusses | 40 | Unit of competency |
| W9349 | CPCCCA3010A | Install and replace windows and doors | 32 | Unit of competency |
| W9352 | CPCCCA3013A | Install lining, panelling and moulding | 24 | Unit of competency |
| W9414 | CPCCJN3004A | Manufacture joinery components | 40 | Unit of competency |
4. Work Placement and Supervised Skills Pratice units
Units below are available for the development of Employability Skills and supervised skills practice.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0303 | Y0303 | Supervised Skills Practice 1 | 40 | Module |
| Y0300 | Supervised Skills Practice 2 | 40 | Module | |
| Y0315 | Supervised Skills Practice 3 | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA65 | Pre-Apprenticeship (Carpentry) | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC17 | Carpentry and Joinery Pre-Apprenticeship | Pathway |
Note
1. This training program has been created as a pathway of the Training Package qualification CPC20211 Certificate II in Construction Pathways.
2. This qualification is the copyright of Department of Education, Employment and Workplace Relations.
3. The outline has been entered onto STARS by Training Curriculum Services, Department of Training and Workforce Development on 14/10/2011.
2. This qualification is the copyright of Department of Education, Employment and Workplace Relations.
3. The outline has been entered onto STARS by Training Curriculum Services, Department of Training and Workforce Development on 14/10/2011.
Entry Requirements
Not Applicable
