Pathway Outline
Date retreived
22/07/2026 1:24 PM AWST
22/07/2026 1:24 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship (Carpentry)
Pre-Apprenticeship (Carpentry)
Pathway
National Code
—
—
State Code
WA65
WA65
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
19/05/2011
19/05/2011
Field of Education
0403 - Building
0403 - Building
Approved Date
04/08/2009
04/08/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
19/05/2011
19/05/2011
Nominal Hours
600
600
Description
This is a pre-apprenticeship program in Carpentry based on the Training Package CPC08 qualification CPC20208. It provides learners with the required competencies for articulating into an apprenticeship program in the same field.
Packaging Rules
1. Compulsory Units
12 units of competency are required for award of this qualification
- 6 compulsory units plus
- 6 elective units
A minimum of two and a maximum of four elective units may be selected from one field of work
- 6 compulsory units plus
- 6 elective units
A minimum of two and a maximum of four elective units may be selected from one field of work
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9435 | CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | 32 | Unit of competency |
| W9367 | CPCCCM1005A | Carry out measurements and calculations | 16 | Unit of competency |
| W9366 | CPCCCM1004A | Conduct workplace communication | 16 | Unit of competency |
| W9365 | CPCCCM1003A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| W9364 | CPCCCM1002A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
2. Elective Units
Complete all 6 units
The following table outlines ONE example of a training program for this qualification. Please refer to the Construction, Plumbing and Services Integrated Framework Training Package CPC08 for the full details of available options.
The following table outlines ONE example of a training program for this qualification. Please refer to the Construction, Plumbing and Services Integrated Framework Training Package CPC08 for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9375 | CPCCCM2006A | Apply basic levelling procedures | 16 | Unit of competency |
| W9337 | CPCCCA2001A | Handle carpentry materials | 16 | Unit of competency |
| W2073 | BCCCM2010B | Install trench support | 8 | Unit of competency |
| W9338 | CPCCCA2002A | Use carpentry tools and equipment | 52 | Unit of competency |
| W9411 | CPCCJN3001A | Use static machines | 25 | Unit of competency |
| W9368 | CPCCCM1006A | Work safely at heights | 16 | Unit of competency |
3. Additional Units
Additional Units - Pre-apprentices completing the requirements of additional units will receive Statements of Attainment for any additional competencies completed. Select additional units so that the total hours for the program do not exceed 600.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9347 | CPCCCA3008A | Construct eaves | 20 | Unit of competency |
| W9346 | CPCCCA3007A | Construct pitched roofs | 36 | Unit of competency |
| W9339 | CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground | 32 | Unit of competency |
| W9345 | CPCCCA3006A | Erect roof trusses | 40 | Unit of competency |
| W9349 | CPCCCA3010A | Install and replace windows and doors | 32 | Unit of competency |
| W9352 | CPCCCA3013A | Install lining, panelling and moulding | 24 | Unit of competency |
| W9414 | CPCCJN3004A | Manufacture joinery components | 40 | Unit of competency |
4. Work Placement and Supervised Skills Practice Units
Complete ALL of the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0303 | Y0303 | Supervised Skills Practice 1 | 40 | Module |
| Y0300 | Supervised Skills Practice 2 | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA53 | Pre-Apprenticeship (Carpentry and Joinery) | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB43 | Pre-Apprenticeship (Carpentry) | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification CPC20208 Certificate II in Construction Pathways,
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements.
The outline has been entered onto STARS by VET Teaching and Learning, WA Department of Education of Training on 30/7/2009.
Further information on this training program may be obtained from Murray Warren, email Murray.Warren@swantafe.wa.edu.au.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements.
The outline has been entered onto STARS by VET Teaching and Learning, WA Department of Education of Training on 30/7/2009.
Further information on this training program may be obtained from Murray Warren, email Murray.Warren@swantafe.wa.edu.au.
No information