Pathway Outline
Date retreived
23/07/2026 10:02 PM AWST
23/07/2026 10:02 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship Electrical
SAL Kickstart Pre-Apprenticeship Electrical
Pathway
National Code
—
—
State Code
WB27
WB27
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
29/07/2011
29/07/2011
Field of Education
0313 - Electrical And Electronic Engineering And Technology
0313 - Electrical And Electronic Engineering And Technology
Approved Date
19/10/2010
19/10/2010
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
1.00
1.00
Current Release Date
29/07/2011
29/07/2011
Nominal Hours
600
600
Description
NOTE: No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of Certificate II level SAL Pre-Apprenticeship Electrical pathway WB27 and the Electrotechnology Training Package qualiification UEE22010.
This training program leads to the completion of Certificate II level SAL Pre-Apprenticeship Electrical pathway WB27 and the Electrotechnology Training Package qualiification UEE22010.
Packaging Rules
1. CORE UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7803 | UEENEEE001B | Apply OHS practices in the workplace | 18 | Unit of competency |
| D3533 | UEENEEE048C | Carry out routine work activities in an electrotechnology environment | 36 | Unit of competency |
| D3559 | UEENEEE079A | Identify and select components, accessories and materials for electrotechnology work activities | 54 | Unit of competency |
| W8180 | UEENEEK042A | Participate in environmentally sustainable work practices | 18 | Unit of competency |
| W7805 | UEENEEE003B | Solve problems in extra-low voltage single path circuits | 36 | Unit of competency |
| W7806 | UEENEEE004B | Solve problems in multiple path d.c. circuits | 36 | Unit of competency |
| W7841 | UEENEEE041B | Use of routine equipment/plant/technologies in an electrotechnology environment | 54 | Unit of competency |
2. GROUP A ELECTIVES - IMPORTED AND COMMON ELECTIVE UNITS
Complete elective units from Group A and Group B to achieve a total weighting of 120 points.
Complete electives from Group A to achieve a minimum of 0 points and a maximum of 60 points. Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 2. The UEE22010 qualification outline in the UEE07 Training Package should be consulted for further information on the selection of units.
Complete electives from Group A to achieve a minimum of 0 points and a maximum of 60 points. Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 2. The UEE22010 qualification outline in the UEE07 Training Package should be consulted for further information on the selection of units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7740 | UEENEEC010B | Deliver a service to customers | 18 | Unit of competency |
| W7731 | UEENEEC001B | Maintain documentation | 18 | Unit of competency |
| W7822 | UEENEEE020B | Provide basic instruction in the use of electrotechnology apparatus | 18 | Unit of competency |
| W7759 | UEENEED001B | Use basic computer applications relevant to a workplace | 18 | Unit of competency |
3. GROUP B ELECTIVES
Complete units from Group B to achieve a minimum of 60 points and a maximum of 120 points.
Students may complete additional units from Group A and Group B, but total hours for the program should not exceed 600. Students completing the requirements of additional electives will receive a Statement of Attainment for any additional units completed.
Students may complete additional units from Group A and Group B, but total hours for the program should not exceed 600. Students completing the requirements of additional electives will receive a Statement of Attainment for any additional units completed.
4. WORK PLACEMENT MODULES
Complete all modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB14 | SAL Kickstart Pre-Apprenticeship - Electrical | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB28 | Pre-Apprenticeship (Electrical) | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification UEE22010 Certificate II in Electrotechnology (Career Start) on 4 November 2010. Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Training and Workforce Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Training and Workforce Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Entry Requirements
Not Applicable
