Pathway Outline
Date retreived
22/07/2026 6:22 AM AWST
22/07/2026 6:22 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Mechanical (CAD)
Mechanical (CAD)
Pathway
National Code
—
—
State Code
WT45
WT45
DTWD Status
Approved
Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
15/09/2013
15/09/2013
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
26/10/2006
26/10/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
4 Semesters
Current Release Version
4.00
4.00
Current Release Date
15/09/2013
15/09/2013
Nominal Hours
1184
1184
Description
This is a training program that leads to the completion of the Metals and Engineering Training Package MEM05 qualification MEM40105.
This qualification is designed to reflect the role of team leaders and supervisors in the industry sector. The focus is on the Mechanical CAD specialisation within the mechanical post trade.
This qualification is designed to reflect the role of team leaders and supervisors in the industry sector. The focus is on the Mechanical CAD specialisation within the mechanical post trade.
Packaging Rules
1. Core Units
Complete all units in this group. See Training Package for requirement related to entry with a Certificate III.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5502 | MEM13014A | Apply principles of occupational health and safety in the work environment | 4 | Unit of competency |
| W5531 | MEM15024A | Apply quality procedures | 4 | Unit of competency |
| W5532 | MEM15002A | Apply quality systems | 16 | Unit of competency |
| W5552 | MEM17003A | Assist in the provision of on the job training | 18 | Unit of competency |
| W5452 | MEM16008A | Interact with computing technology | 18 | Unit of competency |
| W5451 | MEM16006A | Organise and communicate information | 18 | Unit of competency |
| W5449 | MEM12024A | Perform computations | 27 | Unit of competency |
| W5492 | MEM12023A | Perform engineering measurements | 48 | Unit of competency |
| W5513 | MEM14005A | Plan a complete activity | 32 | Unit of competency |
| W5512 | MEM14004A | Plan to undertake a routine task | 4 | Unit of competency |
| W5548 | MEM16007A | Work with others in a manufacturing, engineering or related environment | 4 | Unit of competency |
2. Group A Specialisation Units
Select units from this list to a value of at least 12 points and up to a maximum of 109 points
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5425 | MEM09009C | Create 2D drawings using computer aided design system | 72 | Unit of competency |
| W5409 | MEM09010C | Create 3D models using computer aided design system | 36 | Unit of competency |
| W5422 | MEM09006B | Perform advanced engineering detail drafting | 36 | Unit of competency |
3. Group B Elective Units
Select units from this group to bring the total value of Group A and B units to 109 points, including any prerequisites.
No information
Note
This training program is a representation of the qualification code MEM40105 taken from the Metals and Engineering Training Package MEM05 which should be consulted for full description of requirements. MEM05 is endorsed until 31/01/2009
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN on 3/10/06
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN on 3/10/06
Entry Requirements
Not Applicable