Qualification Outline
22/07/2026 4:24 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Timber Truss and Frame Design and Manufacture
Certificate II in Timber Truss and Frame Design and Manufacture
FPI20711
J464
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 4.00 | 01/05/2015 | Current | Approved |
| 3.00 | 27/08/2013 | Replaced | Approved |
Description
This qualification is designed for job roles in the timber truss and frame sector of the forest and forest products industry.
Schedule
Packaging Rules
Total number of units = thirteen (13)- seven (7) core units plus
- six (6) elective units, consisting of:
- up to six (6) units from Group A
- up to two (2) units from Group B
- up to two (2) units recommended for packaging at Certificate I, II or III level from this or any other endorsed Training Package or state/territory accredited course.
Elective units must be relevant to work undertaken in the timber truss and frame design sector of the industry
1. Core Units
All seven (7) units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3804 | FPICOT2235A | Assess timber for manufacturing potential | 20 | Unit of competency |
| D5867 | FPICOR2202B | Communicate and interact effectively in the workplace | 20 | Unit of competency |
| D5868 | FPICOR2203B | Follow environmental care procedures | 20 | Unit of competency |
| D5870 | FPICOR2205B | Follow OHS policies and procedures | 20 | Unit of competency |
| D5871 | FPICOR2207B | Maintain quality and product care | 20 | Unit of competency |
| D5897 | FPICOT2219B | Use hand-held tools | 20 | Unit of competency |
| D5866 | FPICOR2201B | Work effectively in the forest and forest products industry | 20 | Unit of competency |
2. Group A Elective Units
Up to six (6) units to be completed from Group A.
Please refer to the packaging rules for the full details of available options.
3. Group B Elective Units
Up to two (2) units to be completed from Group B.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D5950 | FPICOT3241B | Assemble timber wall frames | 40 | Unit of competency |
| D5951 | FPICOT3242B | Lay up timber roof trusses | 40 | Unit of competency |
| D5952 | FPICOT3243B | Operate a truss press | 20 | Unit of competency |
| D3809 | FPITMM3207A | Set up timber floor trusses | 30 | Unit of competency |
| D5925 | FPICOT3214B | Take off material quantities | 30 | Unit of competency |
| D5875 | FPICOR3204B | Visually assess materials | 17 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S670 | FPI20710 | Certificate II in Timber Truss and Frame Design and Manufacture | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAL5 | FWP20716 | Certificate II in Timber Truss and Frame Design and Manufacture | Qualification |
No information
Entry Requirements
There are no entry requirements.
Traineeships and Apprenticeships