Qualification Outline

Date retreived
22/07/2026 7:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Shopfitting

Certificate III in Shopfitting

Qualification
National Code:
CPC31811
State Code:
D407
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
19/05/2011
Approved Date
11/10/2011
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
775
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
19/05/2011
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 19/05/2011 Current Approved
Description

This qualification provides a trade outcome in shopfitting.
Occupational titles may include:
Shopfitter.
The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work.
The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context.
Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

Schedule
Packaging Rules
To achieve this qualification, the candidate must demonstrate competency in:
30 units of competency:
- 19 core units
- 11 elective units.

A maximum of two of the required eleven elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.
1. Core Untis

All nine (9) units must be completed

State Code National Code Title Hours Type
W9375 CPCCCM2006A Apply basic levelling procedures 16 Unit of competency
W9435 CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry 32 Unit of competency
D7350 CPCCCM1015A Carry out measurements and calculations 16 Unit of competency
D7349 CPCCCM1014A Conduct workplace communication 16 Unit of competency
W9373 CPCCCM2004A Handle construction materials 16 Unit of competency
D7348 CPCCCM1013A Plan and organise work 16 Unit of competency
W9370 CPCCCM2001A Read and interpret plans and specifications 32 Unit of competency
W9374 CPCCCM2005A Use construction tools and equipment 40 Unit of competency
D7347 CPCCCM1012A Work effectively and sustainably in the construction industry 16 Unit of competency
2. Shopfitting Field of Work Core Untis

All ten (10) units must be completed

State Code National Code Title Hours Type
W9519 CPCCSH3005A Apply and trim decorative finishes 40 Unit of competency
W9518 CPCCSH3004A Apply finishes 16 Unit of competency
W9517 CPCCSH3003A Assemble and install shopfront commercial entries bulkheads and components 40 Unit of competency
W9415 CPCCJN3005A Cut and install glass 8 Unit of competency
W9349 CPCCCA3010A Install and replace windows and doors 32 Unit of competency
W9512 CPCCSH2001A Prepare surfaces 8 Unit of competency
W9515 CPCCSH3001A Set out and assemble cabinets, showcases, wall units, counters and workstations 32 Unit of competency
W9516 CPCCSH3002A Set out and fabricate shopfront commercial entries bulkheads and component fittings 40 Unit of competency
W9513 CPCCSH2002A Use aluminium sections for fabrication 6 Unit of competency
W9411 CPCCJN3001A Use static machines 25 Unit of competency
3. Elective Units

Eleven (11) units to be completed
The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full list of available options

State Code National Code Title Hours Type
W9354 CPCCCA3015A Assemble partitions 40 Unit of competency
D7357 CPCCCO2013A Carry out concreting to simple forms 24 Unit of competency
W9340 CPCCCA3001A Carry out general demolition of minor building structures 24 Unit of competency
W9353 CPCCCA3014A Construct bulkheads 40 Unit of competency
W9503 CPCCSF2003A Cut and bend materials using oxy-LPG equipment 20 Unit of competency
W9377 CPCCCM2008A Erect and dismantle restricted height scaffolding 16 Unit of competency
W8629 LMFFM3028B Fabricate synthetic solid surface products 36 Unit of competency
W9352 CPCCCA3013A Install lining, panelling and moulding 24 Unit of competency
W9607 CPCCWC3004A Install suspended ceilings 80 Unit of competency
D7354 CPCCCM3001B Operate elevated work platforms 16 Unit of competency
W9376 CPCCCM2007A Use explosive power tools 8 Unit of competency
Replaces
State Code National Code Title Type
W594 CPC31808 Certificate III in Shopfitting Qualification
Replaced By
State Code National Code Title Type
J489 CPC31812 Certificate III in Shopfitting Qualification
VET Info Notes
This training program is a representation of the qualification code CPC31811 taken from the Construction, Plumbing and Services Training Package CPC08 V6 which should be consulted for a full description of requirements.

1. This qualification is the copyright of DEEWR.

2. Further information on this qualification is contained in the training Package available on the national training website at training.gov.au.

3. This model training program was entered on to STARS on 11/10/2011.
Entry Requirements

Not Applicable

Traineeships and Apprenticeships
No information