Qualification Outline
22/07/2026 1:15 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate IV in Automotive Manufacturing (Bus/Truck/Trailer)
Certificate IV in Automotive Manufacturing (Bus/Truck/Trailer)
AUM45108
W566
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 01/09/2008 | Current | Approved |
Description
Qualification Notes
This qualification allows individuals to develop skills and knowledge to become specialist within the automotive manufacturing sector. They may undertake a range of complex and non-routine tasks, with accountability for the quality of outcomes. The range of technical skills and knowledge is proficient and leadership for others would be expected.
This qualification is a post-trade level qualification in the industry.
It is designed for a range of specialised functions in the bus/truck/trailer manufacturing area of the industry.
Entry requirements
As an entry requirement, individuals must hold the AUM35108 Certificate III in Automotive Manufacturing (Bus/Truck/Trailer) prior to attempting this qualification, or be able to demonstrate equivalent competencies.
Licensing, legislative, regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Packaging Rules
To be awarded the Certificate IV in Automotive Manufacturing (Bus/Truck/Trailer), competency must be achieved in fourteen (14) units of competency:
four (4) core units of competency
ten (10) elective units of competency, as specified below.
Note: Where prerequisite units apply, these must be considered in the total number of units chosen.
Core units of competency
Unit code
Unit title
Prerequisites
AUM3401B
Plan and organise production
MSACMC410A
Lead change in a manufacturing environment
MSACMS401A
Ensure process improvements are sustained
MSACMT251A
Apply quality standards
Elective units of competency
Select ten (10) units of competency from this list.
Unit code
Unit title
Prerequisites
AUM2901B
Develop and produce documentation and procedures
AUM3003B
Document designs
AUM5301B
Produce drawings manually
AUM5403B
Produce computer-aided drawings (CAD)
AUM8012B
Prepare and document quotation
AUM8032B
Control stock
AUM8121B
Conduct final inspections and functional tests
AUM8122B
Conduct simulated or road performance test
AUM8123B
Conduct welding inspection
AUM8141B
Prepare new product designs
MSACMS200A
Apply competitive manufacturing practices
MSACMS201A
Sustain process improvements
MSACMT220A
Apply quick changeover procedures
MSACMT230A
Apply cost factors to work practices
MSACMT231A
Interpret product costs in terms of customer requirements
MSACMT250A
Monitor process capability
MSACMT260A
Use planning software systems in manufacturing
MSACMT261A
Use SCADA systems in manufacturing
MSACMT280A
Undertake root cause analysis
MSACMT421A
Facilitate a Just In Time (JIT) system
MSACMT430A
Improve cost factors in work practices
MSACMT432A
Analyse manual handling processes
MSACMT440A
Lead 5S in a manufacturing environment
MSACMT450A
Undertake process capability improvements
MSACMT452A
MSACMT451A
Mistake proof a production process
MSACMT452A
Apply statistics to processes in manufacturing
MSACMT460A
Facilitate the use of planning software systems in manufacturing
MSACMT260A
MSACMT461A
Facilitate SCADA systems in manufacturing team or work area
MSACMT261A
MSACMT481A
Undertake proactive maintenance analyses
MSACMT482A
Assist in implementing a proactive maintenance strategy
MSAENV272B
Participate in environmentally sustainable work practices
MSAENV472B
Implement and monitor environmentally sustainable work practices
Up to two (2) elective units may be selected from this Training Package, other endorsed Training Packages or accredited courses, where they are available at Certificate III, IV or Diploma.
Schedule
Packaging Rules
14 competency units are required for this qualification, including:- 4 core units plus;
- 10 elective units
Note: Where prerequisite units apply, these must be considered in the total number of units
chosen.
1. Core Units
All 4 core units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8991 | MSACMT251A | Apply quality standards | 30 | Unit of competency |
| W8976 | MSACMS401A | Ensure process improvements are sustained | 50 | Unit of competency |
| W8965 | MSACMC410A | Lead change in a manufacturing environment | 50 | Unit of competency |
| W9146 | AUM3401B | Plan and organise production | 25 | Unit of competency |
2. Elective Units
10 elective units to be completed
The following table outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9001 | MSACMT432A | Analyse manual handling processes | 50 | Unit of competency |
| W9006 | MSACMT452A | Apply statistics to processes in manufacturing | 40 | Unit of competency |
| W9217 | AUM8121B | Conduct final inspections and functional tests | 24 | Unit of competency |
| W9219 | AUM8123B | Conduct welding inspection | 30 | Unit of competency |
| W9174 | AUM8032B | Control stock | 40 | Unit of competency |
| W9137 | AUM2901B | Develop and produce documentation and procedures | 40 | Unit of competency |
| W8998 | MSACMT421A | Facilitate a Just in Time (JIT) system | 50 | Unit of competency |
| W9170 | AUM8012B | Prepare and document quotation | 15 | Unit of competency |
| W8974 | MSACMS201A | Sustain process improvements | 40 | Unit of competency |
| W8996 | MSACMT280A | Undertake root cause analysis | 30 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAX5 | AUM45101 | Certificate IV in Automotive Manufacturing (Bus, Truck & Trailer) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| J178 | AUM40112 | Certificate IV in Automotive Manufacturing | Qualification |
VET Info Notes
1. This qualification is the copyright of DEEWR.
2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by Training Curriculum Services, DTWD on 3/3/2011.
Entry Requirements
Not applicable.
Traineeships and Apprenticeships
