Qualification Outline

Date retreived
22/07/2026 5:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate IV in Energy Efficiency and Assessment

Certificate IV in Energy Efficiency and Assessment

Qualification
National Code:
UEE43111
State Code:
A153
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
17/04/2014
Approved Date
25/07/2014
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
1152
Duration
3 Semesters
Current Release Number
4.00
Current Release Date
17/04/2014
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
4.00 17/04/2014 Current Approved
Description

Scope
This qualification provides competencies to conduct a residential, office and retail dwellings residential and Small Medium Enterprises (SME) energy audit and to develop energy efficient strategies to reduce an energy use in a range of energy services. The qualification also addresses the environmental and legislative contexts with the fundamental energy audit methodology to develop the initiative and solutions of sustainability and financial viability.
The core competencies of this qualification meets the prescribed requirements for ERAC requirements for an ‘Electrician’s licence’.

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- Twenty four (24) core units and
- A combination of elective units to achieve a total weighting of 260 points:
- A maximum of 120 weighting points may be chosen from Group A Imported and Common Elective Units
- A maximum of 120 weighting points may be chosen from Group B Elective Units
- A minimum of 140 to a maximum of 260 weighting points to be chosen from Group C Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.

Note: UEENEEG105A - those holding an 'Unrestricted Electricians Licence' or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements
1. Core Units

All twenty four (24) units must be completed

State Code National Code Title Hours Type
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7317 UEENEEG063A Arrange circuits, control and protection for general electrical installations 36 Unit of competency
WC720 UEENEEK153A Assess energy loads and uses for energy efficiency in residential, office and retail premises 36 Unit of competency
WC429 UEENEEE124A Compile and produce an energy sector detailed report 54 Unit of competency
S7326 UEENEEG109A Develop and connect electrical control circuits 72 Unit of competency
WC719 UEENEEK152A Develop strategies to address sustainability issues for electrical installations 18 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC714 UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures 18 Unit of competency
WC423 UEENEEE117A Implement and monitor energy sector OHS policies and procedures 18 Unit of competency
S8321 UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations 18 Unit of competency
S7320 UEENEEG103A Install low voltage wiring and accessories 18 Unit of competency
W7839 UEENEEE038B Participate in development and follow a personal competency development plan 18 Unit of competency
S7324 UEENEEG107A Select wiring systems and cables for low voltage general electrical installations 54 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
S7318 UEENEEG101A Solve problems in electromagnetic devices and related circuits 54 Unit of competency
S7319 UEENEEG102A Solve problems in low voltage a.c. circuits 72 Unit of competency
S7316 UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits 54 Unit of competency
S7315 UEENEEG006A Solve problems in single and three phase low voltage machines 72 Unit of competency
S7323 UEENEEG106A Terminate cables, cords and accessories for low voltage circuits 36 Unit of competency
S7325 UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
S7322 UEENEEG105A Verify compliance and functionality of low voltage general electrical installations 36 Unit of competency
2. Group A Imported and Common Elective Units

Units may be chosen to a maximum of 120 weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
W7808 UEENEEE006B Apply methods to maintain currency of industry developments 18 Unit of competency
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
WC385 UEENEED101A Use computer applications relevant to a workplace 18 Unit of competency
3. Group B Elective Units

Units may be chosen to a maximum of 120 weighting points from Group B.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC657 UEENEEI141A Develop electrical integrated systems 18 Unit of competency
WC458 UEENEEF102A Install and maintain cabling for multiple access to telecommunication services 108 Unit of competency
S7328 UEENEEG171A Install, set up and commission interval metering 18 Unit of competency
WC656 UEENEEI140A Plan the electrical installation of integrated systems 18 Unit of competency
WC519 UEENEEG181A Provide advice on effective and energy efficient lighting products 18 Unit of competency
WC521 UEENEEG183A Provide advice on the application of energy efficient lighting for ambient and aesthetic effect 18 Unit of competency
WC520 UEENEEG182A Supply effective and efficient lighting products for domestic and small commercial applications 36 Unit of competency
WC388 UEENEED104A Use engineering applications software on personal computers 36 Unit of competency
4. Group C Elective Units

A minimum of 140 to a maximum of 260 weighting points to be chosen from Group C.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC721 UEENEEK154A Assess energy loads and uses for energy efficiency in commercial facilities 36 Unit of competency
WC722 UEENEEK155A Assess energy loads and uses for energy efficiency in industrial properties and enterprises 36 Unit of competency
WC524 UEENEEG186A Design effective and efficient lighting for residential and commercial buildings 18 Unit of competency
WC659 UEENEEI143A Develop access control of electrical integrated systems using logic-based programming tools 18 Unit of competency
WC658 UEENEEI142A Develop an electrical integrated system interface for access through a touch screen 20 Unit of competency
WC421 UEENEEE110A Develop and implement energy sector maintenance programs 54 Unit of competency
WC660 UEENEEI144A Develop interfaces for multiple access methods to monitor, schedule and control an electrical integrated system 18 Unit of competency
W7735 UEENEEC005B Estimate electrotechnology projects 36 Unit of competency
S7433 UEENEEG076A Install and replace low voltage current transformer metering 18 Unit of competency
WC522 UEENEEG184A Provide photometric data for illumination system design 54 Unit of competency
WC523 UEENEEG185A Select effective and efficient light sources and luminaries for given locations and designs 54 Unit of competency
Replaced By
State Code National Code Title Type
BFM7 UEE43120 Certificate IV in Energy Efficiency and Assessment Qualification
No information
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
No information