Qualification Outline

Date retreived
22/07/2026 5:25 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate IV in Electrical - Data and Voice Communications

Certificate IV in Electrical - Data and Voice Communications

Qualification
National Code:
UEE40211
State Code:
A133
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
17/04/2014
Approved Date
24/07/2014
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
1152
Duration
3 Semesters
Current Release Number
4.00
Current Release Date
17/04/2014
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
4.00 17/04/2014 Current Approved
Description

Scope
This qualification provides competencies to select, install, commission, fault find and maintain electrical and communications systems and equipment in building and premises. It includes ERAC requirements for an ‘Electrician’s licence’ and ACMA requirements for Open Cabler registration.

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- Twenty four (24) core units and
160680 points:
- A maximum of 220 weighting points may be chosen from Group A Imported and Common Elective Units
- A maximum of 500 weighting points may be chosen from Group B Elective Units
- A minimum of 180 to a maximum of 680 weighting points to be chosen from Group C Elective Units

Note: UEENEEG105A - those holding an 'Unrestricted Electricians Licence' or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
1. Core Units

All twenty four (24) units must be completed

State Code National Code Title Hours Type
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7317 UEENEEG063A Arrange circuits, control and protection for general electrical installations 36 Unit of competency
WC429 UEENEEE124A Compile and produce an energy sector detailed report 54 Unit of competency
S7326 UEENEEG109A Develop and connect electrical control circuits 72 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC714 UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures 18 Unit of competency
WC423 UEENEEE117A Implement and monitor energy sector OHS policies and procedures 18 Unit of competency
WC458 UEENEEF102A Install and maintain cabling for multiple access to telecommunication services 108 Unit of competency
WC460 UEENEEF104A Install and modify performance data communication copper cabling 36 Unit of competency
S8321 UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations 18 Unit of competency
S7320 UEENEEG103A Install low voltage wiring and accessories 18 Unit of competency
W7839 UEENEEE038B Participate in development and follow a personal competency development plan 18 Unit of competency
S7324 UEENEEG107A Select wiring systems and cables for low voltage general electrical installations 54 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
S7318 UEENEEG101A Solve problems in electromagnetic devices and related circuits 54 Unit of competency
S7319 UEENEEG102A Solve problems in low voltage a.c. circuits 72 Unit of competency
S7316 UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits 54 Unit of competency
S7315 UEENEEG006A Solve problems in single and three phase low voltage machines 72 Unit of competency
S7323 UEENEEG106A Terminate cables, cords and accessories for low voltage circuits 36 Unit of competency
S7325 UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
S7322 UEENEEG105A Verify compliance and functionality of low voltage general electrical installations 36 Unit of competency
2. Group A Imported and Common Elective Units

Units may be chosen to a maximum of 80 weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
WG730 HLTAID001 Provide cardiopulmonary resuscitation 3 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
WC385 UEENEED101A Use computer applications relevant to a workplace 18 Unit of competency
W9434 CPCCOHS1001A Work safely in the construction industry 4 Unit of competency
3. Group B Elective Units

Units may be chosen to a maximum of 80 weighting points from Group B.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC471 UEENEEF115A Assemble and connect telecommunication frames and cabinets 54 Unit of competency
WC386 UEENEED102A Assemble, set-up and test computing devices 72 Unit of competency
WC657 UEENEEI141A Develop electrical integrated systems 18 Unit of competency
WC468 UEENEEF112A Install aerial telecommunication cables 36 Unit of competency
WC465 UEENEEF109A Install and connect data and voice communication equipment 36 Unit of competency
WC461 UEENEEF105A Install and modify optical fibre performance data communication cabling 36 Unit of competency
WC469 UEENEEF113A Install underground communication cables 36 Unit of competency
WC426 UEENEEE121A Plan an integrated cabling installation system 36 Unit of competency
WC656 UEENEEI140A Plan the electrical installation of integrated systems 18 Unit of competency
WC466 UEENEEF110A Select and arrange data and voice equipment for local area networks 36 Unit of competency
WC464 UEENEEF108A Select and arrange equipment for wireless communication networks 36 Unit of competency
WC470 UEENEEF114A Set up and configure basic data communication systems 36 Unit of competency
WC409 UEENEED146A Set up and configure basic local area network (LAN) 36 Unit of competency
WC463 UEENEEF107A Set up and configure the wireless capabilities of communications and data storage devices 36 Unit of competency
WC462 UEENEEF106A Solve problems in voice and data communications circuits 36 Unit of competency
WC467 UEENEEF111A Test, report and rectify faults in data and voice installations 36 Unit of competency
WC388 UEENEED104A Use engineering applications software on personal computers 36 Unit of competency
4. Group C Elective Units

A minimum of 80 to a maximum of 160 weighting points to be chosen from Group C.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC659 UEENEEI143A Develop access control of electrical integrated systems using logic-based programming tools 18 Unit of competency
WC658 UEENEEI142A Develop an electrical integrated system interface for access through a touch screen 20 Unit of competency
WC660 UEENEEI144A Develop interfaces for multiple access methods to monitor, schedule and control an electrical integrated system 18 Unit of competency
W7735 UEENEEC005B Estimate electrotechnology projects 36 Unit of competency
W7734 UEENEEC004B Prepare specifications for the supply of materials and equipment for electrotechnology projects 36 Unit of competency
WC456 UEENEEE192A Produce detailed electrotechnology /utilities drawings using computer aided design equipment and software 54 Unit of competency
W7739 UEENEEC009B Provide quotations for inspection and compliance audit services 72 Unit of competency
WC422 UEENEEE114A Supervise and coordinate energy sector work activities 36 Unit of competency
Replaces
State Code National Code Title Type
W837 UEE40210 Certificate IV in Electrical - Data and Voice Communications Qualification
Replaced By
State Code National Code Title Type
BFI9 UEE40220 Certificate IV in Electrical - Data and Voice Communications Qualification
No information
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
No information