Qualification Outline

Date retreived
22/07/2026 5:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Floor Covering and Finishing

Certificate II in Floor Covering and Finishing

Qualification
National Code:
LMF20102
State Code:
W021
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
11/05/2009
Approved Date
09/12/2003
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
379
Duration
Unspecified
Current Release Number
1.00
Current Release Date
11/05/2009
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 11/05/2009 Current Approved
Description
Schedule
1.

CORE

These units are mandatory

State Code National Code Title Hours Type
W8496 LMFCR0003B Carry out measurements and calculations 20 Unit of competency
W8495 LMFCR0002B Communicate in the workplace 20 Unit of competency
W8494 LMFCR0001B Follow safe working policies and practices 40 Unit of competency
W8497 LMFCR0004B Work effectively with others 15 Unit of competency
2.

SPECIALIST

Select all six (6) core units.

In addition, select one (1) of the remaining specialist units in accordance with the General Structuring Rules.

State Code National Code Title Hours Type
W0190 LMFFC2007A Install conventional unjoined carpet floor coverings 36 Unit of competency
W0186 LMFFC2003A Install hard underlays 24 Unit of competency
W0192 LMFFC2009A Install pre-finished and manufactured/engineered timber flooring 36 Unit of competency
W0189 LMFFC2006A Install soft underlays and carpet gripper strips 32 Unit of competency
W0191 LMFFC2008A Lay flat resilient flooring 60 Unit of competency
W0188 LMFFC2005A Prepare monolithic sub-floor 32 Unit of competency
W0187 LMFFC2004A Prepare timber sub-floor 20 Unit of competency
W0185 LMFFC2002A Remove existing floor coverings 24 Unit of competency
W0184 LMFFC2001A Use flooring sector hand and power tools 40 Unit of competency
3.

ELECTIVES

Select three (3) units not lower than Certificate II level. These can be specialist, generic or imported in accordance with the General Structuring Rules.

An example of electives may be:

State Code National Code Title Hours Type
W0193 LMFFC3001A Inspect sub-floors 20 Unit of competency
W8694 LMFGN2002B Move and store materials and products 16 Unit of competency
S2440 TDTD1297B Operate specialised load shifting equipment 40 Unit of competency
Replaces
State Code National Code Title Type
1585 50311 Certificate II in Furnishing (Timber Flooring) Accredited course
Replaced By
State Code National Code Title Type
W501 LMF20908 Certificate II in Flooring Technology Qualification
VET Info Notes
This training program is a representation of the qualification code LMF20102 taken from the Furnishing Training Package LMF02 which should be consulted for full description of requirements. LMF02 is endorsed until 31 October 2005.

1. This qualification is the copyright of The Australian National Training Authority.

2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by Swan TAFE on 5 November 2003.
Entry Requirements
No information
Traineeships and Apprenticeships
No information