Unit of competency Outline

Date retreived
22/07/2026 6:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Comply with industry quality assurance requirements

Comply with industry quality assurance requirements

Unit of competency
National Code
AHCWRK318
State Code
OFB68
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/01/2023
View on TGA
State Implementation and Classification
Approved Date
09/06/2023
Field of Education
080317 - Quality Management
Original Release Date
09/06/2023
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to comply with industry quality assurance requirements.The unit applies to individuals who comply with industry quality assurance requirements under broad direction and take responsibility for their own work.All work must be carried out to comply with workplace procedures, health and safety in the workplace requirements, legislative and regulatory requirements.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Follow quality assurance practices
  • 1.1 Identify elements of quality assurance (QA) applicable to industry sector
  • 1.2 Identify product quality standards applicable to industry sector
  • 1.3 Identify hazards that are reasonably expected for each critical control point
  • 1.4 Identify critical control points for work area
  • 1.5 Identify methods of control for each hazard
  • 1.6 Complete recordkeeping according to workplace requirements
  • 1.7 Follow industry-based QA practices
  • 1.8 Complete internal QA checks according to workplace requirements
2. Implement standard operating procedures
  • 2.1 Identify and comply with standard operating procedures according to workplace requirements
  • 2.2 Report non-conformances or defective product according to workplace procedures
  • 2.3 Take corrective action according to workplace procedures
3. Report problems that affect quality
  • 3.1 Identify potential or existing quality problems
  • 3.2 Identify instances of variation in quality from specifications or work instructions
  • 3.3 Report variations and potential problems according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAO24 AHCWRK306 Comply with industry quality assurance requirements Unit of competency