Unit of competency Outline
Date retreived
22/07/2026 9:57 PM AWST
22/07/2026 9:57 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate machinery and equipment
Operate machinery and equipment
Unit of competency
National Code
AHCMOM304
AHCMOM304
State Code
BAN80
BAN80
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
030717 - Plant And Machine Operations
Original Release Date
12/01/2017
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to prepare and operate machinery and equipment in a safe and controlled manner that is used principally in agriculture, horticulture, and conservation and land management work. This unit does not apply to chainsaws, tractors, vehicles or earth moving equipment.The unit applies to individuals who operate machinery and equipment under broad direction, and take responsibility for their own work.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare machinery and equipment for use
- 1.1 Confirm activity to be undertaken, including identifying potential hazards and risks and implementing safe working practices to manage risks
- 1.2 Source and interpret relevant machinery and equipment operation and maintenance manual and manufacturer instructions
- 1.3 Assess the work site and confirm the suitability of the machinery and equipment for the task
- 1.4 Select and maintain personnel protective equipment applicable to the machinery and equipment to be operated and the task to be undertaken
- 1.5 Fit and use personal protective equipment according to workplace procedures and job requirements
- 1.6 Conduct routine pre-operational checks as described in operation and maintenance manual
- 1.7 Replace and report damaged or worn components in line with workplace reporting requirements
- 1.8 Attach ancillary equipment and check for correct operation
2. Operate machinery and equipment
- 2.1 Operate machinery according to task requirements, conditions, operation and maintenance manual and manufacturer specifications
- 2.2 Monitor machinery performance and efficiency and make adjustments
- 2.3 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
3. Complete machinery and equipment operation
- 3.1 Conduct shut down of machinery according to workplace procedures
- 3.2 Perform routine operational servicing and minor maintenance according to operation and maintenance manual
- 3.3 Identify and report malfunctions, faults, irregular performance or damage according to workplace procedures
- 3.4 Clean, secure and store machinery and equipment according to workplace procedures
- 3.5 Maintain machinery and equipment use records in required format
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D7017 | AHCMOM304A | Operate machinery and equipment | Unit of competency |