Unit of competency Outline

Date retreived
22/07/2026 7:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clean premises and equipment

Clean premises and equipment

Unit of competency
National Code
SITHACS001
State Code
AWS34
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
03/03/2016
View on TGA
State Implementation and Classification
Approved Date
12/07/2016
Field of Education
039909 - Cleaning
Original Release Date
12/07/2016
Nominal Hours
12
Description
This unit describes the performance outcomes, skills and knowledge required to carry out general cleaning duties. It requires the ability to set up cleaning equipment and to safely clean premises and equipment using resources efficiently to reduce negative environmental impacts. The unit applies to people responsible for general cleaning duties in any industry context. They work under supervision and usually as part of a team.No occupational licensing, certification or specific legislative requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Select and set up equipment and materials.
  • 1.1.Select appropriate equipment for cleaning task.
  • 1.2.Check equipment is clean and in safe working condition according to manufacturer instructions prior to use.
  • 1.3.Select and prepare required wet and dry cleaning agents or chemicals according to manufacturer recommendations and work health and safety procedures.
  • 1.4.Select and use personal protective clothing where necessary.
2. Clean wet and dry areas and associated equipment.
  • 2.1.Minimise potential customer inconvenience in scheduling and performing cleaning tasks.
  • 2.2.Prepare wet and dry areas to be cleaned and identify hazards.
  • 2.3.Barricade work areas or place warning signs as required.
  • 2.4.Use cleaning agents or chemicals for specific areas, surfaces and equipment, according to manufacturer recommendations and work health and organisational procedures.
  • 2.5.Use equipment safely and according to manufacturer instructions.
  • 2.6.Reduce negative environmental impacts through efficient use of energy, water and other resources.
  • 2.7.Sort general waste and safely dispose of waste and hazardous substances to minimise negative environmental impacts.
3. Maintain and store cleaning equipment and chemicals.
  • 3.1.Clean equipment after use according to organisational requirements and manufacturer instructions.
  • 3.2.Carry out or arrange routine maintenance of equipment.
  • 3.3.Identify and report equipment faults.
  • 3.4.Store equipment in designated area in a condition ready for re-use.
  • 3.5.Store chemicals according to workplace health and safety requirements.
No information
No information
Replaces
State Code National Code Title Type
WF583 SITHACS101 Clean premises and equipment Unit of competency
Replaced By
State Code National Code Title Type
OEA49 SITHACS009 Clean premises and equipment Unit of competency