Unit of competency Outline

Date retreived
23/07/2026 8:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain sawdoctoring tools

Maintain sawdoctoring tools

Unit of competency
National Code
FWPCOT3211
State Code
AXL51
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030715 - Precision Metalworking
Original Release Date
05/10/2016
Nominal Hours
25
Description
This unit of competency describes the outcomes required to assess tool wear and the need to recondition straight edges and tension guides by grinding, machining or filing. Work is completed in a forest products factory setting.The unit applies to Sawdoctor, Saw Repairer. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for maintenance
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness.
  • 1.3 Remove sawdoctoring tools for reconditioning from designated machinery.
  • 1.4 Plan maintenance process in line with work order.
2. Recondition straight edge
  • 2.1 Follow organisational safety procedures and manufacturer’s recommendations throughout all repair and maintenance processes.
  • 2.2 Assess straight edge damage and wear select appropriate reconditioning method.
  • 2.3 Determine correct work angle for re-surfacing or removal of wear.
  • 2.4 Clamp straight edge at correct angle to prevent movement, vibration and slippage during the re-surfacing process.
  • 2.5 Inspect abrasive wheel or cutting tool, clean or change as required to suit work material removal, tolerance and surface texture requirements.
  • 2.6 Grind, machine or file straight edge to remove distortions and maintain edge straightness and flatness without overheating or causing distortion,
  • 2.7 Remove all signs of wear or damage from reference surfaces.
  • 2.8 Clean straight edge and debur edges.
  • 2.9 Dispose of distorted sawdoctoring tools in line with environmental protection practices.
3. Recondition tension gauge
  • 3.1 Select grinder or other appropriate enterprise method for reconditioning tension gauges in line with organisational procedures.
  • 3.2 Set grinder to produce required radius or circle diameter for the tension gauge.
  • 3.3 Position tension gauge and clamp in grinder securely, ensuring cord height is central to gauge length and arc is ground square to plane of the gauge body.
  • 3.4 Inspect grinding wheel, and dress and change to suit work, material and required tolerance.
  • 3.5 Grind gauge to required accuracy and profile until all visible edge and face wear is removed.
  • 3.6 Select and monitor grinding speed and feed rates to avoid overheating, distortion and burn marks.
  • 3.7 Dispose of tension gauges distorted during the process in line with environmental protection practices.
  • 3.8 Record and report processing problems and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D5922 FPICOT3211B Maintain sawdoctoring tools Unit of competency
Replaced By
State Code National Code Title Type
OBM50 FWPCOT3279 Assess and maintain saw technology tools Unit of competency