Unit of competency Outline
Date retreived
22/07/2026 6:07 AM AWST
22/07/2026 6:07 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Conduct backhoe/loader operations
Conduct backhoe/loader operations
Unit of competency
National Code
RIIMPO319E
RIIMPO319E
State Code
OAK56
OAK56
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
27/03/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/03/2019
Nominal Hours
50
Description
This unit describes the skills and knowledge required to operate a backhoe/loader to load, distribute and place materials.This unit applies to those working in site based roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for backhoe/loader operations
- 1.1 Access, interpret and apply backhoe/loader operations documentation
- 1.2 Obtain, interpret, clarify and confirm work instructions
- 1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
- 1.4 Select and wear personal protective equipment required for work activities
- 1.5 Identify, obtain and implement signage traffic management requirements according to standard operating procedures and safe work practices
- 1.6 Select required backhoe/loader equipment and confirm suitability for work activities
- 1.7 Obtain and interpret emergency procedures for backhoe/loaders, and be prepared for fires, accidents and emergencies
- 1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
2. Operate backhoe/ loader in line with established requirements
- 2.1 Carry out prestart and start-up checks in line with workplace procedures
- 2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
- 2.3 Drive and operate machine using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
- 2.4 Monitor hazards and risks during operations , and ensure safety of self, other personnel, plant and equipment
- 2.5 Monitor and manage equipment performance using indicators and alarms
3. Load, carry and place materials to complete work activity
- 3.1 Establish weight of load and ensure it is within safe operational limits of the machine
- 3.2 Use lifting gear within safe working load requirements and in line with workplace procedures
- 3.3 Position and locate machinery to ensure stable and effective shift materials according to work requirements
- 3.4 Shift materials safely and effectively, using hand, audible and communication signal, in line with workplace procedures
- 3.5 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
4. Select, remove, fit and attachments for a backhoe/loader
- 4.1 Select attachment for the task and fit attachment in line with workplace procedures
- 4.2 Test attachment and ensure correct fitting and operation
- 4.3 Use attachment within design limits and in accordance with workplace procedures
- 4.4 Remove, clean and store attachments in designated location in line with workplace procedures
5. Relocate the backhoe/ loader
- 5.1 Prepare backhoe/loader for relocation
- 5.2 Move backhoe/loader safely between worksites, observing relevant codes and traffic management requirements
6. Conduct housekeeping activities
- 6.1 Clear work area and dispose of or recycle materials according to workplace procedures
- 6.2 Manage and/or report hazards to maintain a safe working environment
- 6.3 Complete and file or distribute documentation in a manner that complies with workplace practices
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH424 | RIIMPO319D | Conduct backhoe/loader operations | Unit of competency |