Unit of competency Outline

Date retreived
22/07/2026 8:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare surfaces for plastering

Prepare surfaces for plastering

Unit of competency
National Code
CPCCSP2003
State Code
OCP71
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040317 - Plastering
Original Release Date
01/06/2021
Nominal Hours
24
Description
This unit specifies the skills and knowledge required to prepare substrates for solid plastering. It includes patching or filling holes in floors, sheet or masonry walls and ceiling surfaces.The unit is suitable for people with basic skills and knowledge who undertake routine work tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to prepare surfaces for plastering.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and use personal protective equipment (PPE) for each stage of the task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Patch holes and depressions.
  • 2.1 Determine patching methods and materials from type of material surface, size of hole/depression, compatibility of materials and planned finish.
  • 2.2 Apply materials using appropriate application methods.
3 Prepare surface.
  • 3.1 Determine method of preparation of surface to suit the type of finish.
  • 3.2 Remove protruding and loose materials and prepare surface for solid plastering.
  • 3.3 Apply sealing or primer coat to prepared surface.
4 Clean up.
  • 4.1 Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.
  • 4.2 Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.
No information
No information
Replaces
State Code National Code Title Type
W9543 CPCCSP2003A Prepare surfaces for plastering Unit of competency