Pathway Outline
Date retreived
22/07/2026 8:59 AM AWST
22/07/2026 8:59 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship (Cabinet Making/Furniture Making)
Pre-Apprenticeship (Cabinet Making/Furniture Making)
Pathway
National Code
—
—
State Code
WA39
WA39
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
11/05/2009
11/05/2009
Field of Education
0301 - Manufacturing Engineering And Technology
0301 - Manufacturing Engineering And Technology
Approved Date
27/10/2009
27/10/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
11/05/2009
11/05/2009
Nominal Hours
600
600
Description
This training program will lead to the completion of qualification LMF20309.
The aim of this program is to provide an articulation into the apprenticeship course in furniture/cabinet making.
The aim of this program is to provide an articulation into the apprenticeship course in furniture/cabinet making.
Packaging Rules
1. Core Group
5 core units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8496 | LMFCR0003B | Carry out measurements and calculations | 20 | Unit of competency |
| W8281 | MSAPMSUP102A | Communicate in the workplace | 26 | Unit of competency |
| W8599 | LMFFM2001B | Use furniture making sector hand and power tools | 38 | Unit of competency |
| W8282 | MSAPMSUP106A | Work in a team | 26 | Unit of competency |
| W8249 | MSAPMOHS200A | Work safely | 26 | Unit of competency |
2. Specialist Group
5 units must be completed.
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8608 | LMFFM2011B | Apply manufactured board conversion techniques | 16 | Unit of competency |
| W8600 | LMFFM2002B | Assemble furnishing components | 24 | Unit of competency |
| W0277 | LMFFM2006A | Hand make timber joints | 36 | Unit of competency |
| W8509 | LMFFF2004B | Prepare surfaces for finishing | 16 | Unit of competency |
| W8607 | LMFFM2010B | Set up, operate and maintain basic static machines | 56 | Unit of competency |
3. Elective Units
2 units must be completed
The balance of units (up to a maximum of two) may be drawn in any combination from:
- the specialist units listed, additional to any already slelected
- other units in this Training Package, which may include a maximum of two from Certificate II level and maximum of one from Certificate III level
- units from other relevant endorsed Training Packages, where those units are available at Certificate II
Note: That if any of the above units have prerequisites, they must be included in the total.
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
The balance of units (up to a maximum of two) may be drawn in any combination from:
- the specialist units listed, additional to any already slelected
- other units in this Training Package, which may include a maximum of two from Certificate II level and maximum of one from Certificate III level
- units from other relevant endorsed Training Packages, where those units are available at Certificate II
Note: That if any of the above units have prerequisites, they must be included in the total.
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8604 | LMFFM2007B | Follow plans to assemble production furniture | 16 | Unit of competency |
| W8695 | LMFGN3001B | Read and interpret work documents | 24 | Unit of competency |
4. Work Placement/Supervised Skills Group
In addition to the units specified in group 1, 2 and 3, some of the following units may be included up to a total of no more than 600 hours.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0303 | Y0303 | Supervised Skills Practice 1 | 40 | Module |
| Y0300 | Supervised Skills Practice 2 | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB35 | SAL Kickstart Pre-Apprenticeship - Cabinet Making/Furniture Making | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC23 | Cabinet Making/Furniture Making Pre-Apprenticeship | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification LMF20309.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements
It has been entered on to STARS by VET Teaching & Learning Directorate on 9/12/2009.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements
It has been entered on to STARS by VET Teaching & Learning Directorate on 9/12/2009.
Entry Requirements
Not applicable.
