Pathway Outline
Date retreived
22/07/2026 7:36 AM AWST
22/07/2026 7:36 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Cabinet Making/Furniture Making
SAL Kickstart Pre-Apprenticeship - Cabinet Making/Furniture Making
Pathway
National Code
—
—
State Code
WB35
WB35
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
11/05/2009
11/05/2009
Field of Education
0301 - Manufacturing Engineering And Technology
0301 - Manufacturing Engineering And Technology
Approved Date
27/10/2009
27/10/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
11/05/2009
11/05/2009
Nominal Hours
600
600
Description
NOTE: No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Cabinet Making/Furniture Making Pathway WB35 and the LMF02 Furnishing Training Package qualification LMF20309.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Cabinet Making/Furniture Making Pathway WB35 and the LMF02 Furnishing Training Package qualification LMF20309.
Packaging Rules
1. Core Units
Complete all 5 units from this list.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8281 | MSAPMSUP102A | Communicate in the workplace | 26 | Unit of competency |
| W7008 | MSAPMOPS101A | Make measurements | 20 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W8599 | LMFFM2001B | Use furniture making sector hand and power tools | 38 | Unit of competency |
| W8282 | MSAPMSUP106A | Work in a team | 26 | Unit of competency |
2. Elective Units - Group A
Select at least one (1) unit from Group A. The followng outlines one example of a training program. Refer to the Training Package for full details on available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8249 | MSAPMOHS200A | Work safely | 26 | Unit of competency |
3. Elective Units - Group B
Select a minimum of four (4) units from Group B with a maximum of two (2) units coded MSACM.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8608 | LMFFM2011B | Apply manufactured board conversion techniques | 16 | Unit of competency |
| W8600 | LMFFM2002B | Assemble furnishing components | 24 | Unit of competency |
| W8604 | LMFFM2007B | Follow plans to assemble production furniture | 16 | Unit of competency |
| W8603 | LMFFM2006B | Hand make timber joints | 36 | Unit of competency |
| W8509 | LMFFF2004B | Prepare surfaces for finishing | 16 | Unit of competency |
| W8607 | LMFFM2010B | Set up, operate and maintain basic static machines | 56 | Unit of competency |
4. Elective Units - Group C
Up to three (3) relevant units may be chosen from other or units available in this Training Package, other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 3 units) or Certificate III level (maximum 1 unit).
Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.
Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8695 | LMFGN3001B | Read and interpret work documents | 24 | Unit of competency |
5. WORK PLACEMENT MODULES
Complete all modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB17 | SAL Kickstart Pre-Apprenticeship - Cabinet Making/Furniture Making | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA39 | Pre-Apprenticeship (Cabinet Making/Furniture Making) | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification LMF20309 Certificate II in Furniture Making on 1 June 2011.
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satifactor completion of year 10.
the School Apprenticeship Link (SAL) Kickstart Program is a pilot program Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from Training Curriculum Services of the Department of Training and Workforce Development on 08 92295464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satifactor completion of year 10.
the School Apprenticeship Link (SAL) Kickstart Program is a pilot program Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from Training Curriculum Services of the Department of Training and Workforce Development on 08 92295464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Entry Requirements
Not applicable.
