Pathway Outline
Date retreived
22/07/2026 7:32 AM AWST
22/07/2026 7:32 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Cabinet Making/Furniture Making
SAL Kickstart Pre-Apprenticeship - Cabinet Making/Furniture Making
Pathway
National Code
—
—
State Code
WB17
WB17
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
11/05/2009
11/05/2009
Field of Education
0301 - Manufacturing Engineering And Technology
0301 - Manufacturing Engineering And Technology
Approved Date
27/10/2009
27/10/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
1.00
1.00
Current Release Date
11/05/2009
11/05/2009
Nominal Hours
600
600
Description
NOTE:No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Cabinet Making/Furniture Making Pathway WB17 and the LMF02 Furnishing Training Package qualification LMF20309.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Cabinet Making/Furniture Making Pathway WB17 and the LMF02 Furnishing Training Package qualification LMF20309.
Packaging Rules
1. CORE UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8496 | LMFCR0003B | Carry out measurements and calculations | 20 | Unit of competency |
| W8281 | MSAPMSUP102A | Communicate in the workplace | 26 | Unit of competency |
| W8599 | LMFFM2001B | Use furniture making sector hand and power tools | 38 | Unit of competency |
| W8282 | MSAPMSUP106A | Work in a team | 26 | Unit of competency |
| W8249 | MSAPMOHS200A | Work safely | 26 | Unit of competency |
2. SPECIALIST ELECTIVE UNITS
Complete 5 (five) Specialist Elective units. The following outlines one example of a training program. Refer to the Training Package for full details on available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8608 | LMFFM2011B | Apply manufactured board conversion techniques | 16 | Unit of competency |
| W8600 | LMFFM2002B | Assemble furnishing components | 24 | Unit of competency |
| W0277 | LMFFM2006A | Hand make timber joints | 36 | Unit of competency |
| W8509 | LMFFF2004B | Prepare surfaces for finishing | 16 | Unit of competency |
| W8607 | LMFFM2010B | Set up, operate and maintain basic static machines | 56 | Unit of competency |
3. ELECTIVE UNITS
2 (two) units must be completed. Units may be drawn in any combination from:
- the specialist units listed, additional to any already slelected
- other units in this Training Package, which may include a maximum of two from Certificate II level and maximum of one from Certificate III level
- units from other relevant endorsed Training Packages, where those units are available at Certificate II
Note: That if any of the above units have prerequisites, they must be included in the total.
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
- the specialist units listed, additional to any already slelected
- other units in this Training Package, which may include a maximum of two from Certificate II level and maximum of one from Certificate III level
- units from other relevant endorsed Training Packages, where those units are available at Certificate II
Note: That if any of the above units have prerequisites, they must be included in the total.
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8604 | LMFFM2007B | Follow plans to assemble production furniture | 16 | Unit of competency |
| W8695 | LMFGN3001B | Read and interpret work documents | 24 | Unit of competency |
4. WORK PLACEMENT MODULES
Complete all modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB35 | SAL Kickstart Pre-Apprenticeship - Cabinet Making/Furniture Making | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification LMF20309 Certificate II in Furniture Making on 13 August 2010. Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
This program was amended on 9 March 2011 by Training Curriculum Services, to indicate flexibility in the choice of electives.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
This program was amended on 9 March 2011 by Training Curriculum Services, to indicate flexibility in the choice of electives.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Entry Requirements
Not applicable.
