Pathway Outline
Date retreived
22/07/2026 9:02 AM AWST
22/07/2026 9:02 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Kitchens and Bathrooms
Kitchens and Bathrooms
Pathway
National Code
—
—
State Code
WA84
WA84
DTWD Status
Approved
Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
04/10/2011
04/10/2011
Field of Education
0301 - Manufacturing Engineering And Technology
0301 - Manufacturing Engineering And Technology
Approved Date
03/11/2009
03/11/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
5 Semesters
Current Release Version
2.00
2.00
Current Release Date
04/10/2011
04/10/2011
Nominal Hours
822
822
Description
This qualification covers the skills and knowledge required to perform a range of skills associated with the manufacture and installation of free-standing and fitted furniture in the kitchen and bathroom furnishing sector.
Packaging Rules
1. Year One
To be awarded the Certificate III in Cabinet Making, competency must be achieved in twenty seven (27) units.
Units must be selected according to the rules described below.
- 6 mandatory units must be completed
- 18 specialist units must be completed
- 3 other electives must be completed
The Year One program as follows:
Units must be selected according to the rules described below.
- 6 mandatory units must be completed
- 18 specialist units must be completed
- 3 other electives must be completed
The Year One program as follows:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8608 | LMFFM2011B | Apply manufactured board conversion techniques | 16 | Unit of competency |
| W8601 | LMFFM2004B | Apply sheet laminates by hand | 8 | Unit of competency |
| W8600 | LMFFM2002B | Assemble furnishing components | 24 | Unit of competency |
| W8496 | LMFCR0003B | Carry out measurements and calculations | 20 | Unit of competency |
| W8281 | MSAPMSUP102A | Communicate in the workplace | 26 | Unit of competency |
| W8603 | LMFFM2006B | Hand make timber joints | 36 | Unit of competency |
| W8602 | LMFFM2005B | Join solid timber | 8 | Unit of competency |
| W8695 | LMFGN3001B | Read and interpret work documents | 24 | Unit of competency |
| W8607 | LMFFM2010B | Set up, operate and maintain basic static machines | 56 | Unit of competency |
| W8599 | LMFFM2001B | Use furniture making sector hand and power tools | 38 | Unit of competency |
| W8282 | MSAPMSUP106A | Work in a team | 26 | Unit of competency |
| W8249 | MSAPMOHS200A | Work safely | 26 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
2. Year Two
Complete the units as follows:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D2765 | LMFKB3003A | Check and measure fit of cabinets | 15 | Unit of competency |
| D2766 | LMFKB3004A | Conduct on-site adjustments to cabinets and components | 15 | Unit of competency |
| D2767 | LMFKB3005A | Fabricate cabinets for the built-in environment | 70 | Unit of competency |
| D2768 | LMFKB3006A | Install fitted cabinets and components | 30 | Unit of competency |
| W8619 | LMFFM3012B | Prepare cutting list from plans and job specifications | 16 | Unit of competency |
| W8612 | LMFFM3003B | Produce angled and curved furniture using manufactured board | 64 | Unit of competency |
| W8618 | LMFFM3011B | Produce manual and computer-aided production drawings | 52 | Unit of competency |
3. Year Three
Complete the units as follows:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8633 | LMFFM3033B | Construct jigs and fixtures | 34 | Unit of competency |
| W8696 | LMFGN3002B | Estimate and cost job | 16 | Unit of competency |
| W8614 | LMFFM3005B | Fabricate custom furniture | 52 | Unit of competency |
| W8620 | LMFFM3013B | Measure and draw site layout for manufactured furniture products | 16 | Unit of competency |
| W8825 | LMFFM2003B | Select and apply hardware | 16 | Unit of competency |
| W8628 | LMFFM3027B | Set up, operate and maintain automated edge banding machines | 58 | Unit of competency |
| W8631 | LMFFM3031B | Set up, operate and maintain CNC machining and processing centres | 56 | Unit of competency |
No information
Note
1. This training program has been created as a pathway of the Training Package qualification code LMF32109, which is the copyright of DEEWR and should be consulted for full description of requirements.
2. Further information on this training program may be obtained from Yvette Chapman, email: Yvette.Chapman@swrc.wa.edu.au.
3. Details have been entered on to STARS by Curriculum Development and Research, WA Dept of Training and Workforce Development, on 22/2/2010.
2. Further information on this training program may be obtained from Yvette Chapman, email: Yvette.Chapman@swrc.wa.edu.au.
3. Details have been entered on to STARS by Curriculum Development and Research, WA Dept of Training and Workforce Development, on 22/2/2010.
Entry Requirements
Not applicable.