Pathway Outline
Date retreived
22/07/2026 9:17 AM AWST
22/07/2026 9:17 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Roof Plumbing
Pre-Apprenticeship - Roof Plumbing
Pathway
National Code
—
—
State Code
WA64
WA64
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
19/05/2011
19/05/2011
Field of Education
0403 - Building
0403 - Building
Approved Date
15/07/2009
15/07/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
1.00
1.00
Current Release Date
19/05/2011
19/05/2011
Nominal Hours
600
600
Description
NOTE: Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
The Certificate I in Construction (Roof Plumbing) is a pre-apprenticeship training program that has been created as a pathway from the qualification code CPC10108. This qualification is designed to reflect the role of entry level employees who perform routine tasks under direct supervision in the industry sector.
The Certificate I in Construction (Roof Plumbing) is a pre-apprenticeship training program that has been created as a pathway from the qualification code CPC10108. This qualification is designed to reflect the role of entry level employees who perform routine tasks under direct supervision in the industry sector.
Packaging Rules
1. Compulsory Units
10 units of competency are required for award of this qualification:
- 7 compulsory units
- 3 elective units
A maximum of one of the three required elective units below may be substituted by selecting a relevant unit of competency from any Certificate I or II construction qualification or qualification in another endorsed Training Package.
- 7 compulsory units
- 3 elective units
A maximum of one of the three required elective units below may be substituted by selecting a relevant unit of competency from any Certificate I or II construction qualification or qualification in another endorsed Training Package.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9366 | CPCCCM1004A | Conduct workplace communication | 16 | Unit of competency |
| W9365 | CPCCCM1003A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| W9601 | CPCCVE1001A | Undertake a basic construction project | 24 | Unit of competency |
| W9374 | CPCCCM2005A | Use construction tools and equipment | 40 | Unit of competency |
| W9364 | CPCCCM1002A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
2. Elective Units
Complete the following 3 electives
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9375 | CPCCCM2006A | Apply basic levelling procedures | 16 | Unit of competency |
| W9367 | CPCCCM1005A | Carry out measurements and calculations | 16 | Unit of competency |
| W9363 | CPCCCM1001A | Undertake basic estimation and costing | 14 | Unit of competency |
3. Additional Technical Units
Additional Units - Pre-apprentices completing the requirements of additional units will receive Statements of Attainment for any additional competencies completed. Total hours for the program should not exceed 600.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9636 | CPCPCM2011A | Apply first aid in the workplace | 24 | Unit of competency |
| W9633 | CPCPCM2008A | Cut and join sheet metal | 16 | Unit of competency |
| W9630 | CPCPCM2005A | Handle and store plumbing materials | 12 | Unit of competency |
| W9635 | CPCPCM2010A | Mark out materials | 16 | Unit of competency |
| W9629 | CPCPCM2004A | Read plans and calculate plumbing quantities | 12 | Unit of competency |
| W9631 | CPCPCM2006A | Use plumbing hand and power tools | 16 | Unit of competency |
| W9638 | CPCPCM2013A | Weld using arc welding equipment | 8 | Unit of competency |
| W9637 | CPCPCM2012A | Weld using oxy-acetylene equipment | 8 | Unit of competency |
| W9626 | CPCPCM2001A | Work effectively in the plumbing and services sector | 16 | Unit of competency |
| W9640 | CPCPCM2015A | Work safely on roofs | 15 | Unit of competency |
4. Support Units
Complete the following units. Units from other endorsed Training Packages or accredited courses may be used to provide language/literacy/numeracy development and/or support in place of the units listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D0628 | BSBCMM101A | Apply basic communication skills | 40 | Unit of competency |
| D1025 | BSBWOR202A | Organise and complete daily work activities | 15 | Unit of competency |
| W2823 | AURC251356A | Read in the workplace | 12 | Unit of competency |
| W2824 | AURC251677A | Use numbers in the workplace | 20 | Unit of competency |
5. Work Placement/Project Units
Complete ALL of the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 50647 | Undertake a Basic Project - 1 | 40 | Module | |
| 50648 | Undertake a Basic Project - 2 | 40 | Module | |
| 50649 | Undertake a Basic Project - 3 | 40 | Module | |
| 50650 | Undertake a Work Placement - 1 | 40 | Module | |
| 50651 | Undertake a Work Placement - 2 | 40 | Module |
No information
Note
This training program has been created as a pathway of the Training Package qualification CPC10108, and should be consulted for full description of requirements.
It has been created on STARS by VET Teaching and Learning, WA dept of Training and Workforce Development in December 2009.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
It has been created on STARS by VET Teaching and Learning, WA dept of Training and Workforce Development in December 2009.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
No information