Pathway Outline
Date retreived
22/07/2026 9:15 AM AWST
22/07/2026 9:15 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Carpentry and Joinery
Pre-Apprenticeship - Carpentry and Joinery
Pathway
National Code
—
—
State Code
WA58
WA58
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
19/05/2011
19/05/2011
Field of Education
0403 - Building
0403 - Building
Approved Date
15/07/2009
15/07/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
1.00
1.00
Current Release Date
19/05/2011
19/05/2011
Nominal Hours
600
600
Description
This training program leads to the completion of the Carpentry and Joinery Pre-apprenticeship Pathway (WA58) and the CPC08 Construction, Plumbing Services and Integrated Framework Training Package qualification CPC10108 Certificate I in Construction.
This program is designed to prepare a person to perform a prescribed range of practical skills involving known routine and procedures.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
This program is designed to prepare a person to perform a prescribed range of practical skills involving known routine and procedures.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
Packaging Rules
1. Compulsory Units
10 units of competency are required for award of this qualification:
- 7 compulsory units
- 3 elective units
A maximum of one of the three required elective units below may be substituted by selecting a relevant unit of competency from any Certificate I or II construction qualification or qualification in another endorsed Training Package.
- 7 compulsory units
- 3 elective units
A maximum of one of the three required elective units below may be substituted by selecting a relevant unit of competency from any Certificate I or II construction qualification or qualification in another endorsed Training Package.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9366 | CPCCCM1004A | Conduct workplace communication | 16 | Unit of competency |
| W9365 | CPCCCM1003A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| W9601 | CPCCVE1001A | Undertake a basic construction project | 24 | Unit of competency |
| W9374 | CPCCCM2005A | Use construction tools and equipment | 40 | Unit of competency |
| W9364 | CPCCCM1002A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
2. Elective units
Complete the following 3 electives
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9375 | CPCCCM2006A | Apply basic levelling procedures | 16 | Unit of competency |
| W9367 | CPCCCM1005A | Carry out measurements and calculations | 16 | Unit of competency |
| W9363 | CPCCCM1001A | Undertake basic estimation and costing | 14 | Unit of competency |
3. Additional Technical Units
Additional Units - Pre-apprentices completing the requirements of additional units will receive Statements of Attainment for any additional competencies completed. Total hours for the program should not exceed 600.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9341 | CPCCCA3002A | Carry out setting out | 12 | Unit of competency |
| W9377 | CPCCCM2008A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| W9337 | CPCCCA2001A | Handle carpentry materials | 16 | Unit of competency |
| W9342 | CPCCCA3003A | Install flooring systems | 40 | Unit of competency |
| W9338 | CPCCCA2002A | Use carpentry tools and equipment | 52 | Unit of competency |
4. Support Units
Complete the following units. Units from other endorsed Training Packages or accredited courses may be used to provide language/literacy/numeracy development and/or support in place of the units listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D0628 | BSBCMM101A | Apply basic communication skills | 40 | Unit of competency |
| D1025 | BSBWOR202A | Organise and complete daily work activities | 15 | Unit of competency |
| W2823 | AURC251356A | Read in the workplace | 12 | Unit of competency |
| W2824 | AURC251677A | Use numbers in the workplace | 20 | Unit of competency |
5. Work Placement/Project Units
Complete ALL of the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 50647 | Undertake a Basic Project - 1 | 40 | Module | |
| 50648 | Undertake a Basic Project - 2 | 40 | Module | |
| 50649 | Undertake a Basic Project - 3 | 40 | Module | |
| 50650 | Undertake a Work Placement - 1 | 40 | Module | |
| 50651 | Undertake a Work Placement - 2 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA02 | Pre-Apprenticeship (Carpentry and Joinery) | Pathway |
Note
This training program was developed by Swan TAFE as a pathway of CPC10108 Certificate I in Construction.
WA58 was entered into STARS on 24/07/2009 by VET Teaching & Learning, WA Department of Education and Training.
Further information on this program may be obtained by contacting Murray Warren on 9442 8356 or email murray.warren@swantafe.wa.edu.au
WA58 was entered into STARS on 24/07/2009 by VET Teaching & Learning, WA Department of Education and Training.
Further information on this program may be obtained by contacting Murray Warren on 9442 8356 or email murray.warren@swantafe.wa.edu.au
No information