Qualification Outline
22/07/2026 6:25 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Advanced Diploma of Electronics and Communications Engineering
Advanced Diploma of Electronics and Communications Engineering
UEE60211
A165
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 4.00 | 17/04/2014 | Current | Approved |
Description
Scope
This qualification provides competencies to design and validate/evaluate electronics and communication equipment and systems, manage risk, estimate and manage projects and provide technical advice/sales.
Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:- Eleven (11) core units and
- A combination of elective units to achieve a total weighting of 1880 points:
- A maximum of 360 weighting points may be chosen from Group A Imported and Common Elective Units
- A maximum of 900 weighting points may be chosen from Group B Elective Units
- A maximum of 280 weighting points may be chosen from Group C Elective Units
- A maximum of 260 weighting points may be chosen from Group D Elective Units
- A minimum of 520 to a maximum of 1320 weighting points to be chosen from Group E Elective Units
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan
1. Core Units
All eleven (11) units must be completed
2. Group A Imported and Common Elective Units
Units may be chosen to a maximum of 360 weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WD503 | MSS402040A | Apply 5S procedures | 30 | Unit of competency |
| WD496 | MSS402001A | Apply competitive systems and practices | 40 | Unit of competency |
| WD500 | MSS402021A | Apply Just in Time procedures | 30 | Unit of competency |
| WD499 | MSS402020A | Apply quick changeover procedures | 30 | Unit of competency |
| D0760 | BSBINN502A | Build and sustain an innovative work environment | 50 | Unit of competency |
| WD512 | MSS402081A | Contribute to the application of a proactive maintenance strategy | 30 | Unit of competency |
| WB921 | BSBWOR502B | Ensure team effectiveness | 50 | Unit of competency |
| D4868 | BSBMGT516C | Facilitate continuous improvement | 50 | Unit of competency |
| D3444 | ICTTEN3056A | Install telecommunications network equipment | 80 | Unit of competency |
| D0755 | BSBINM501A | Manage an information or knowledge management system | 40 | Unit of competency |
| D0846 | BSBMGT502B | Manage people performance | 50 | Unit of competency |
| WD511 | MSS402080A | Undertake root cause analysis | 30 | Unit of competency |
3. Group B Elective Units
Units may be chosen to a maximum of 900 weighting points from Group B.
Please refer to the Training Package for the full list of unit weighting points.
4. Group C Elective Units
Units may be chosen to a maximum of 280 weighting points from Group C.
Please refer to the Training Package for the full list of unit weighting points.
5. Group D Elective Units
Units may be chosen to a maximum of 260 weighting points from Group D.
Please refer to the Training Package for the full list of unit weighting points.
6. Group E Elective Units
A minimum of 520 to a maximum of 1320 weighting points to be chosen from Group E.
Please refer to the Training Package for the full list of unit weighting points.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W871 | UEE60210 | Advanced Diploma of Electronics and Communications Engineering | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFQ2 | UEE60220 | Advanced Diploma of Electronics and Communications Engineering | Qualification |
No information
Entry Requirements
Not applicable.
Traineeships and Apprenticeships
Part-time is defined as a minimum of 20 hours per week.