Qualification Outline

Date retreived
22/07/2026 6:38 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Printing and Graphic Arts (Mail House)

Certificate II in Printing and Graphic Arts (Mail House)

Qualification
National Code:
ICP21010
State Code:
W770
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
08/07/2012
Approved Date
09/09/2014
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
460
Duration
2 Semesters
Current Release Number
2.00
Current Release Date
08/07/2012
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
2.00 08/07/2012 Current Approved
Description

This qualification applies to individuals who perform a range of mainly routine tasks in the mail house sector of the printing and graphic arts industry. They generally work under direct supervision, and use limited practical skills and fundamental operational knowledge in a defined context.

Job Roles

Mail house operators.

Schedule
Packaging Rules
Total number of units = fiteen (15)
Four (4) core units plus;
Five (5) elective units from Group A plus;
Six (6) elective units from Group B

Up to two (2) elective units from Group A can be substituted with Group B elective units listed below.

Four (4) elective units must be selected from Group B.

Up to three (3) Group B elective units may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this or any other endorsed Training Package or accredited course.

Elective units must be relevant to the qualification, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs.
1. Core Units

All four (4) units must be completed.

State Code National Code Title Hours Type
D3258 ICPSU262C Communicate in the workplace 50 Unit of competency
D3247 ICPSU216C Inspect quality against required standards 30 Unit of competency
D3256 ICPSU260C Maintain a safe work environment 30 Unit of competency
D1021 BSBSUS201A Participate in environmentally sustainable work practices 10 Unit of competency
2. Group A Elective Units

Five (5) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
S5545 TLIA4107B Manually sort mail and parcels 20 Unit of competency
D3250 ICPSU224C Perform basic machine maintenance 30 Unit of competency
D3251 ICPSU225C Perform small machine maintenance 30 Unit of competency
D3242 ICPSU203C Prepare and maintain the work area 60 Unit of competency
D3241 ICPSU202C Prepare, load and unload product on and off machine 20 Unit of competency
D3255 ICPSU243C Reconcile process outputs 30 Unit of competency
3. Group B Elective Units

Six (6) units must be chosen from Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
W8989 MSACMT240A Apply 5S procedures in a manufacturing environment 30 Unit of competency
W8973 MSACMS200A Apply competitive manufacturing practices 40 Unit of competency
W8987 MSACMT230A Apply cost factors to work practices 35 Unit of competency
D3008 ICPCF203C Collate and insert mail manually 20 Unit of competency
D4895 TLIA2043A Consolidate mail 20 Unit of competency
D3261 ICPSU280C Enter data into electronic system 30 Unit of competency
D3257 ICPSU261C Follow OHS practices and identify environmental hazards 60 Unit of competency
D3252 ICPSU235C Lift loads mechanically 30 Unit of competency
W8964 MSACMC210A Manage the impact of change on own work 40 Unit of competency
D3009 ICPCF204C Operate addressing machine 20 Unit of competency
D5379 TLIW3006A Operate computerised mail and parcels sorting equipment 40 Unit of competency
D3006 ICPCF105C Operate in-line mail machine 20 Unit of competency
D3239 ICPSU120C Pack product 30 Unit of competency
D3164 ICPPR282C Produce and manage basic digital print 50 Unit of competency
D3026 ICPCF232C Produce basic flat-bed cut product 20 Unit of competency
D3020 ICPCF224C Produce cut (trimmed) product 30 Unit of competency
D3010 ICPCF208C Set up and operate a cheque mailer machine 20 Unit of competency
D3033 ICPCF245C Set up and produce hand-collated or -inserted product 30 Unit of competency
D3025 ICPCF231C Set up machine for basic flat-bed cutting 30 Unit of competency
D3021 ICPCF225C Set up machine for basic flat-bed die cutting or embossing 20 Unit of competency
D3019 ICPCF223C Set up machine for cutting (trimming) 30 Unit of competency
D3253 ICPSU236C Shift loads mechanically 30 Unit of competency
D4899 TLIA2047A Stream mail 20 Unit of competency
W8974 MSACMS201A Sustain process improvements 40 Unit of competency
W8996 MSACMT280A Undertake root cause analysis 30 Unit of competency
Replaces
State Code National Code Title Type
C831 ICP21005 Certificate II in Printing and Graphic Arts (Mail House) Qualification
Replaced By
State Code National Code Title Type
AWB3 ICP20115 Certificate II in Printing and Graphic Arts (General) Qualification
No information
Entry Requirements

There are no entry requirements for this qualification.

Traineeships and Apprenticeships
No information