Qualification Outline
22/07/2026 5:19 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Shunting
Certificate II in Shunting
TLI23220
BGM2
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 29/01/2021 | Current | Approved |
Description
This is a qualification for a person engaged in basic operations within the rail yard/terminal environment undertaking a range of tasks involving known routines and procedures, and taking some responsibility for the quality of work outcomes.
Job roles
Job roles and titles vary across different sectors. Possible job titles relevant to this qualification include:
shunter
terminal operator.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
A total of sixteen (16) units of competency comprising:- nine (9) core units listed below plus
- seven (7) general elective units from the general elective units listed below. Up to three (3) of the general elective units may be selected from any relevant nationally endorsed Training Package. The general elective units must contribute to the vocational outcomes of the qualification.
Where imported units are selected, care must be taken to ensure that all prerequisite units specified are complied with.
1. Core Units
All nine (9) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AVJ45 | TLIF2006 | Apply accident-emergency procedures | 20 | Unit of competency |
| AVK66 | TLIB2122 | Apply awareness of fundamentals of rail operations in yards or sidings | 20 | Unit of competency |
| AVJ44 | TLIF2010 | Apply fatigue management strategies | 30 | Unit of competency |
| AVJ28 | TLIF3087 | Follow work health and safety, and environmental procedures in the rail industry | 10 | Unit of competency |
| AVH33 | TLIW3026 | Operate stand alone signalling/point control equipment | 10 | Unit of competency |
| AVJ69 | TLIE1003 | Participate in basic workplace communication | 40 | Unit of competency |
| OCZ04 | TLIF0020 | Safely access the rail corridor | 10 | Unit of competency |
| AVK03 | TLIC3017 | Shunt rolling stock | 120 | Unit of competency |
| AVJ66 | TLIE2007 | Use communications systems | 20 | Unit of competency |
2. General Elective Units
Seven (7) units may be chosen from the general elective units listed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AVJ26 | TLIF3091 | Apply awareness of dangerous goods and hazardous materials requirements | 15 | Unit of competency |
| AVJ29 | TLIF3085 | Apply local incident response procedures | 20 | Unit of competency |
| OAA33 | TLIF0008 | Apply safety critical communications in the rail environment | 25 | Unit of competency |
| AVH37 | TLIW2041 | Clip points and apply rail safety equipment | 20 | Unit of competency |
| AVK58 | TLIB3021 | Conduct train roll-by inspection | 20 | Unit of competency |
| OBM75 | RIIWHS205E | Control traffic with stop-slow bat | 4 | Unit of competency |
| AVJ92 | TLIC3045 | Operate road/rail vehicle | 25 | Unit of competency |
| AVH55 | TLIU2012 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| AVK63 | TLIB2131 | Prepare train | 15 | Unit of competency |
| OAA36 | TLIE0002 | Process workplace documentation | 20 | Unit of competency |
| AVK59 | TLIB3019 | Test train braking system | 30 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWT5 | TLI22015 | Certificate II in Shunting | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BHF5 | TLI23221 | Certificate II in Shunting | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships