Qualification Outline

Date retreived
22/07/2026 4:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Advanced Diploma of Industrial Electronics and Control Engineering

Advanced Diploma of Industrial Electronics and Control Engineering

Qualification
National Code:
UEE60611
State Code:
A167
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
17/04/2014
Approved Date
09/07/2012
Stream of Study
Paraprofessional - Technical (3400)
VET Act Classifier
C
Nominal Hours
1944
Duration
6 Semesters
Current Release Number
4.00
Current Release Date
17/04/2014
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
4.00 17/04/2014 Current Approved
Description

Scope
This qualification provides competencies to design and validate/evaluate control equipment and systems, manage risk, estimate and manage projects and provide technical advice/sales.

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- Thirty seven (37) core units and
- A combination of elective units to achieve a total weighting of 360points:
- A maximum of 180 weighting points may be chosen from Group A Imported and Common Elective Units
- A maximum of 60 weighting points may be chosen from Group B Elective Units
- A maximum of 100 weighting points may be chosen from Group C Elective Units
- A maximum of 60 weighting points may be chosen from Group D Elective Units
- A minimum of 160 to a maximum of 360 weighting points to be chosen from Group E Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan

Note: UEENEEG105A - those holding an 'Unrestricted Electricians Licence' or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements
1. Core Units

All thirty seven (37) units must be completed

State Code National Code Title Hours Type
S7303 UEENEEE080A Apply industry and community standards to engineering activities 18 Unit of competency
S7304 UEENEEE081A Apply material science to solving electrotechnology engineering problems 54 Unit of competency
W7808 UEENEEE006B Apply methods to maintain currency of industry developments 18 Unit of competency
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7305 UEENEEE082A Apply physics to solving electrotechnology engineering problems 54 Unit of competency
S7317 UEENEEG063A Arrange circuits, control and protection for general electrical installations 36 Unit of competency
WC429 UEENEEE124A Compile and produce an energy sector detailed report 54 Unit of competency
S7326 UEENEEG109A Develop and connect electrical control circuits 72 Unit of competency
W7817 UEENEEE015B Develop design briefs for electrotechnology projects 36 Unit of competency
WC702 UEENEEK132A Develop strategies to address environmental and sustainability issues in the energy sector 18 Unit of competency
WC655 UEENEEI139A Diagnose and rectify faults in digital controls systems 54 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
S7306 UEENEEE083A Establish and follow a competency development plan in an electrotechnology engineering discipline 108 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
WC640 UEENEEI124A Fault find and repair analogue circuits and components in electronic control systems 54 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC423 UEENEEE117A Implement and monitor energy sector OHS policies and procedures 18 Unit of competency
S8321 UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations 18 Unit of competency
S7320 UEENEEG103A Install low voltage wiring and accessories 18 Unit of competency
WC650 UEENEEI134A Manage instrumentation and control projects 36 Unit of competency
S7302 UEENEEE011C Manage risk in electrotechnology activities 54 Unit of competency
WC651 UEENEEI135A Plan instrumentation and control projects 54 Unit of competency
S7312 UEENEEE125A Provide engineering solutions for problems in complex multiple path circuits 54 Unit of competency
S7327 UEENEEG149A Provide engineering solutions to problems in complex polyphase power circuits 54 Unit of competency
S7313 UEENEEE126A Provide solutions to basic engineering computational problems 54 Unit of competency
S7324 UEENEEG107A Select wiring systems and cables for low voltage general electrical installations 54 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
S7318 UEENEEG101A Solve problems in electromagnetic devices and related circuits 54 Unit of competency
S7319 UEENEEG102A Solve problems in low voltage a.c. circuits 72 Unit of competency
S7316 UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits 54 Unit of competency
S7315 UEENEEG006A Solve problems in single and three phase low voltage machines 72 Unit of competency
S7323 UEENEEG106A Terminate cables, cords and accessories for low voltage circuits 36 Unit of competency
S7325 UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
WC388 UEENEED104A Use engineering applications software on personal computers 36 Unit of competency
S7322 UEENEEG105A Verify compliance and functionality of low voltage general electrical installations 36 Unit of competency
W7862 UEENEEE075B Write specifications for industrial electronics and control projects 36 Unit of competency
2. Group A Imported and Common Elective Units

Units may be chosen to a maximum of 180 weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
D0760 BSBINN502A Build and sustain an innovative work environment 50 Unit of competency
WB921 BSBWOR502B Ensure team effectiveness 50 Unit of competency
D4868 BSBMGT516C Facilitate continuous improvement 50 Unit of competency
D0755 BSBINM501A Manage an information or knowledge management system 40 Unit of competency
D0846 BSBMGT502B Manage people performance 50 Unit of competency
3. Group B Elective Units

Units may be chosen to a maximum of 60 weighting points from Group B.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC576 UEENEEH150A Assemble and set up basic security systems 72 Unit of competency
WC632 UEENEEI116A Assemble, enter and verify operating instructions in microprocessor equipped devices 18 Unit of competency
D3585 UEENEEM019A Attend to breakdowns in hazardous areas - coal mining 18 Unit of competency
D3587 UEENEEM021A Attend to breakdowns in hazardous areas - dust atmospheres 18 Unit of competency
D3586 UEENEEM020A Attend to breakdowns in hazardous areas - gas atmospheres 18 Unit of competency
D3588 UEENEEM022A Attend to breakdowns in hazardous areas - pressurisation 18 Unit of competency
WC473 UEENEEG111A Carry out basic repairs to electrical components and equipment 36 Unit of competency
D3604 UEENEEM038A Conduct testing of hazardous areas installations - coal mining 36 Unit of competency
WC666 UEENEEI150A Develop, enter and verify discrete control programs for programmable controllers 54 Unit of competency
WC475 UEENEEG116A Diagnose and rectify faults in traction lift systems 72 Unit of competency
WC472 UEENEEG110A Find and repair faults in LV d.c. electrical apparatus and circuits 54 Unit of competency
D3593 UEENEEM027A Maintain equipment in hazardous areas - coal mining 54 Unit of competency
D3595 UEENEEM029A Maintain equipment in hazardous areas - dust atmospheres 54 Unit of competency
D3594 UEENEEM028A Maintain equipment in hazardous areas - gas atmospheres 54 Unit of competency
D3596 UEENEEM030A Maintain equipment in hazardous areas - pressurisation 54 Unit of competency
WC477 UEENEEG119A Maintain operation of electrical marine equipment and systems 54 Unit of competency
WC476 UEENEEG118A Maintain operation of electrical mining equipment and systems 54 Unit of competency
WC455 UEENEEE191A Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software 54 Unit of competency
WC454 UEENEEE190A Prepare engineering drawings using manual drafting and CAD for electrotechnology/utilities applications 54 Unit of competency
WC654 UEENEEI138A Provide solutions to extra low voltage (ELV) electro-pneumatic control systems and drives 54 Unit of competency
WC532 UEENEEH102A Repairs basic electronic apparatus faults by replacement of components 36 Unit of competency
D3645 UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area 18 Unit of competency
WC620 UEENEEI103A Solve problems in density/level measurement components and systems 36 Unit of competency
WC621 UEENEEI104A Solve problems in flow measurement components and systems 36 Unit of competency
WC619 UEENEEI102A Solve problems in pressure measurement components and systems 36 Unit of competency
WC622 UEENEEI105A Solve problems in temperature measurement components and systems 36 Unit of competency
WC541 UEENEEH111A Troubleshoot single phase input d.c. power supplies 36 Unit of competency
WC618 UEENEEI101A Use instrumentation drawings, specification, standards and equipment manuals 36 Unit of competency
4. Group C Elective Units

Units may be chosen to a maximum of 100 weighting points from Group C.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC490 UEENEEG132A Carry out low voltage electrical field testing and report findings 54 Unit of competency
D3610 UEENEEM044A Conduct detailed inspection of hazardous areas installations - gas atmospheres 36 Unit of competency
D3605 UEENEEM039A Conduct testing of hazardous areas installations - gas atmospheres 36 Unit of competency
D3608 UEENEEM042A Conduct visual inspection of hazardous areas installations 36 Unit of competency
D3613 UEENEEM047A Develop and manage maintenance programs for hazardous areas electrical equipment - coal mining 18 Unit of competency
WC517 UEENEEG179A Develop detailed electrical drawings 54 Unit of competency
WC671 UEENEEI155A Develop structured programs to control external devices 36 Unit of competency
WC668 UEENEEI152A Develop, enter and verify programs in Supervisory Control and Data Acquisition systems 54 Unit of competency
WC667 UEENEEI151A Develop, enter and verify word and analogue control programs for programmable logic controllers 54 Unit of competency
WC511 UEENEEG168A Diagnose and rectify faults in complex lift systems 36 Unit of competency
W7735 UEENEEC005B Estimate electrotechnology projects 36 Unit of competency
D3643 UEENEEM078A Manage compliance of hazardous areas 18 Unit of competency
WC456 UEENEEE192A Produce detailed electrotechnology /utilities drawings using computer aided design equipment and software 54 Unit of competency
WC641 UEENEEI125A Provide solutions to fluid circuit operations 54 Unit of competency
WC642 UEENEEI126A Provide solutions to pneumatic-hydraulic system operations 72 Unit of competency
WC636 UEENEEI120A Provide solutions to problems in industrial control systems 54 Unit of competency
WC516 UEENEEG177A Select low voltage power factor correction equipment 36 Unit of competency
WC506 UEENEEG162A Set up and place LV electrical apparatus and associated circuits into service 36 Unit of competency
WC635 UEENEEI119A Set up industrial field control devices 54 Unit of competency
WC665 UEENEEI149A Solve problems in polyphase electronic power control circuits 54 Unit of competency
WC664 UEENEEI148A Solve problems in single phase electronic power control circuits 54 Unit of competency
5. Group D Elective Units

Units may be chosen to a maximum of 60 weighting points from Group D.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC643 UEENEEI127A Analyse complex electronic circuits controlling fluids 72 Unit of competency
D3632 UEENEEM067A Assess the fitness-for-purpose of hazardous areas explosion-protected equipment - coal mining 54 Unit of competency
D3635 UEENEEM069A Assess the fitness-for-purpose of hazardous areas explosion-protected equipment - dust atmospheres 54 Unit of competency
D3633 UEENEEM068A Assess the fitness-for-purpose of hazardous areas explosion-protected equipment - gas atmospheres 54 Unit of competency
D3601 UEENEEM035A Conduct a conformity assessment of explosion-protected equipment - coal mining 36 Unit of competency
D3603 UEENEEM037A Conduct a conformity assessment of explosion-protected equipment - dust atmospheres 36 Unit of competency
D3602 UEENEEM036A Conduct a conformity assessment of explosion-protected equipment - gas atmospheres 36 Unit of competency
D3629 UEENEEM064A Conduct audit of hazardous areas installations - coal mining 54 Unit of competency
D3631 UEENEEM066A Conduct audit of hazardous areas installations - dust atmospheres 54 Unit of competency
D3630 UEENEEM065A Conduct audit of hazardous areas installations - gas atmospheres 54 Unit of competency
WC673 UEENEEI157A Configure and maintain industrial control system networks 54 Unit of competency
WC421 UEENEEE110A Develop and implement energy sector maintenance programs 54 Unit of competency
WC672 UEENEEI156A Develop and test code for microcontroller devices 54 Unit of competency
WC518 UEENEEG180A Develop detailed and complex drawings for electrical systems using CAD systems 54 Unit of competency
WC661 UEENEEI145A Diagnose and rectify faults in a.c. motor drive systems 54 Unit of competency
WC662 UEENEEI146A Diagnose and rectify faults in d.c. motor drive systems 54 Unit of competency
WC663 UEENEEI147A Diagnose and rectify faults in servo drive systems 54 Unit of competency
WC489 UEENEEG131A Evaluate performance of low voltage electrical apparatus 36 Unit of competency
D3619 UEENEEM054A Plan electrical installations for hazardous areas - gas atmospheres 18 Unit of competency
W7736 UEENEEC006B Prepare tender submissions for electrotechnology projects 54 Unit of competency
6. Group E Elective Units

A minimum of 160 to a maximum of 360 weighting points to be chosen from Group E.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC450 UEENEEE163A Analyse materials for suitability in electrical equipment 72 Unit of competency
WC448 UEENEEE161A Analyse static and dynamic parameters of electrical equipment 72 Unit of competency
WC573 UEENEEH147A Assess electronic apparatus compliance 54 Unit of competency
D3618 UEENEEM053A Classify hazardous areas - dust atmospheres 36 Unit of competency
D3617 UEENEEM052A Classify hazardous areas - gas atmospheres 36 Unit of competency
W7864 UEENEEE078B Contribute to risk management in electrotechnology systems 18 Unit of competency
WC669 UEENEEI153A Design and configure Human-Machine Interface (HMI) networks 54 Unit of competency
WC613 UEENEEH188A Design and develop electronics - computer systems projects 36 Unit of competency
WC505 UEENEEG161A Design and develop modifications to LV electrical machines 54 Unit of competency
WC670 UEENEEI154A Design and use advanced programming tools PC networks and HMI Interfacing 108 Unit of competency
WC451 UEENEEE164A Design electrical machine drives and production layout plans 72 Unit of competency
WC639 UEENEEI123A Design electronic control systems 54 Unit of competency
D3640 UEENEEM075A Design explosion-protected electrical systems - Coal mining 18 Unit of competency
D3623 UEENEEM058A Design explosion-protected electrical systems and installations - dust atmospheres 18 Unit of competency
D3622 UEENEEM057A Design explosion-protected electrical systems and installations - gas atmospheres 18 Unit of competency
D3624 UEENEEM059A Design explosion-protected electrical systems and installations - pressurisation 18 Unit of competency
D3644 UEENEEM079A Design of gas detection systems 18 Unit of competency
WC610 UEENEEH185A Design signal-conditioning subsystems 72 Unit of competency
WC491 UEENEEG143A Develop engineering solution for synchronous machine and control problems 54 Unit of competency
WC492 UEENEEG144A Develop engineering solutions for d.c. machine and control problems 54 Unit of competency
WC493 UEENEEG145A Develop engineering solutions for induction machine and control problems 54 Unit of competency
WC431 UEENEEE128A Develop engineering solutions to photonic system problems 72 Unit of competency
WC504 UEENEEG160A Evaluate performance of LV electrical machines 36 Unit of competency
W7737 UEENEEC007B Manage contract variations 36 Unit of competency
WC609 UEENEEH184A Modify digital signal processing (DSP) based sub-systems 72 Unit of competency
WC447 UEENEEE160A Provide engineering solutions for uses of materials and thermodynamic effects 72 Unit of competency
WC449 UEENEEE162A Select drive components for electrical equipment design 72 Unit of competency
WC644 UEENEEI128A Set up and configure controls on complex fluid systems 72 Unit of competency
WC645 UEENEEI129A Set up electronically controlled mechanically operated complex systems 72 Unit of competency
WC646 UEENEEI130A Set up electronically controlled robotically operated complex systems 72 Unit of competency
WC430 UEENEEE127A Use advanced computational processes to provide solutions to energy sector engineering problems 72 Unit of competency
Replaces
State Code National Code Title Type
W873 UEE60610 Advanced Diploma of Industrial Electronics and Control Engineering Qualification
Replaced By
State Code National Code Title Type
BFL3 UEE60620 Advanced Diploma of Industrial Electronics and Control Engineering Qualification
No information
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
No information