Unit of competency Outline

Date retreived
22/07/2026 9:19 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare ink and additives

Prepare ink and additives

Unit of competency
National Code
ICPSUP211
State Code
AUN66
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to prepare inks and additives in a range of printing processes.It applies to individuals who perform a range of mainly routine tasks in various sectors of the printing and graphic arts industry, using limited practical skills and fundamental knowledge in a defined context. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Select ink
  • 1.1 Inks, dyes and additives are selected according to job specifications
  • 1.2 Suitability of inks, dyes or additives are checked and appropriate action is taken to meet quality standards of client requirements, and enterprise and industry standards
  • 1.3 Inks and dyes are selected according to suitability of substrate, adhesion, physical and chemical resistance, and light fastness, drying method and print process
2. Prepare ink
  • 2.1 Inks, dyes and additives are prepared according to work health and safety (WHS) requirements, and manufacturer’s/supplier’s instructions with suitable precautions to minimise waste
  • 2.2 Correct colour and weight/volume of ink are mixed and prepared to match requirements of the job specifications and the printing press to be used
  • 2.3 Formulation of ink and approved colour is appropriately recorded
3. Store and handle ink
  • 3.1 Inks, dyes and additives are appropriately stored, handled and labelled according to manufacturer’s/supplier’s instructions to prevent damage and hazards to personnel
No information
No information
Replaces
State Code National Code Title Type
D3245 ICPSU211C Prepare ink and additives Unit of competency
Replaced By
State Code National Code Title Type
OBQ68 ICPSUP2110 Prepare inks and additives Unit of competency