Qualification Outline

Date retreived
22/07/2026 4:25 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Printing and Graphic Arts (Mail House)

Certificate III in Printing and Graphic Arts (Mail House)

Qualification
National Code:
ICP31015
State Code:
AWB6
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
26/03/2015
Approved Date
16/09/2015
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
770
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
26/03/2015
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
1.00 26/03/2015 Current Approved
Description

This qualification applies to individuals engaged in mail management services, such as direct marketing and transactional mailing. They are responsible for the preparation, set-up, monitoring and operation of various mailing house machinery and equipment in roles such as a mail processor or team leader. They may provide leadership and guidance to others with some limited responsibility for the output of others.

Licensing/Regulatory Information
No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Schedule
Packaging Rules
Total number of units = Nineteen (19) units
Four (4) core units, plus
Fifteen (15) Electives of which:

- Six (6) elective units must be from Group A
- Two (2) elective units must be from Group A or B
- Three (3) elective units must be from Group B
- the remaining Four (4) elective units may be selected from the remaining elective units, from other qualifications in this Training Package or any other endorsed Training Package, or from an accredited course at Certificate III or IV level.

Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome.
1. Core Units

All four (4) units must be completed.

State Code National Code Title Hours Type
AUO62 ICPSUP262 Communicate in the workplace 50 Unit of competency
AUO73 ICPSUP216 Inspect quality against required standards 30 Unit of competency
AUN93 ICPSUP260 Maintain a safe work environment 30 Unit of competency
AUK77 BSBSUS201 Participate in environmentally sustainable work practices 10 Unit of competency
2. Group A Elective Units

At least six (6) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AUN14 ICPKNW313 Apply knowledge and requirements of the converting, binding and finishing sector 60 Unit of competency
AUN65 ICPSUP362 Communicate as part of a work team 30 Unit of competency
D4893 TLIA2041A Manually sort mail and parcels 20 Unit of competency
AUN51 ICPSUP352 Plan operational processes 50 Unit of competency
AUP36 ICPSUP203 Prepare and maintain the work area 60 Unit of competency
AUM65 ICPSUP202 Prepare, load and unload product on and off machine 20 Unit of competency
AUN76 ICPSUP243 Reconcile process outputs 30 Unit of competency
AUO78 ICPSUP282 Undertake basic machine maintenance 30 Unit of competency
AUN84 ICPSUP351 Undertake basic production scheduling 50 Unit of competency
3. Group B Elective Units

At least three (3) units must be chosen from Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AUM70 ICPSUP487 Analyse manual handling processes 60 Unit of competency
WD503 MSS402040A Apply 5S procedures 30 Unit of competency
WD496 MSS402001A Apply competitive systems and practices 40 Unit of competency
WD501 MSS402030A Apply cost factors to work practices 35 Unit of competency
AUP99 ICTWEB429 Create a markup language document to specification 20 Unit of competency
AUO64 ICPSUP488 Ensure process improvements are sustained 50 Unit of competency
AUN18 ICPSUP235 Lift loads mechanically 30 Unit of competency
AUO22 ICPSUP554 Manage teams 50 Unit of competency
WD498 MSS402010A Manage the impact of change on own work 40 Unit of competency
AUO80 ICPPRP385 Operate a database for digital printing 50 Unit of competency
AUO13 ICPCBF407 Operate a smart card machine and pack product 60 Unit of competency
AUN44 ICPSUP381 Operate and maintain computer resources 50 Unit of competency
AUM93 ICPSUP321 Pack and dispatch (advanced) 50 Unit of competency
D3655 MSAENV272B Participate in environmentally sustainable work practices 20 Unit of competency
AUO42 ICPSUP212 Prepare coatings and adhesives 30 Unit of competency
AUM81 ICPPRN383 Prepare for personalised digital printing 40 Unit of competency
AUO61 ICPPRN484 Prepare for variable data printing 50 Unit of competency
AUN66 ICPSUP211 Prepare ink and additives 30 Unit of competency
AUO41 ICPPRN282 Produce and manage basic digital print 50 Unit of competency
AUN29 ICPPRN288 Produce basic relief printed product 50 Unit of competency
AUO77 ICPCBF342 Produce complex sequenced or multiple folded product 50 Unit of competency
AUO36 ICPSUP271 Provide basic instruction for a task 50 Unit of competency
AUM63 ICPSUP345 Purchase materials and schedule deliveries 50 Unit of competency
AUO82 ICPCBF303 Run and monitor envelope manufacturing machines 30 Unit of competency
AUP38 ICPCBF406 Set up and load in-line smart card machine 60 Unit of competency
AUP31 ICPPRN384 Set up and produce basic digital print 50 Unit of competency
AUO08 ICPPRN393 Set up for basic relief printing 30 Unit of competency
AUP16 ICPCBF396 Set up in-line scoring, folding and gluing machine for envelope manufacture 50 Unit of competency
AUN17 ICPCBF327 Set up machine for complex rotary die cutting or embossing 50 Unit of competency
AUN42 ICPCBF341 Set up machine for complex sequenced or multiple folding 50 Unit of competency
AUM84 ICPCBF294 Set up profile cutting for envelope manufacture 20 Unit of competency
AUN88 ICPSUP236 Shift loads mechanically 30 Unit of competency
WD497 MSS402002A Sustain process improvements 40 Unit of competency
AUM71 ICPSUP342 Undertake inventory procedures 30 Unit of competency
AUP11 ICPCBF326 Undertake pre make-ready for die cutting 50 Unit of competency
WD511 MSS402080A Undertake root cause analysis 30 Unit of competency
W8303 MSAPMSUP390A Use structured problem solving tools 40 Unit of competency
Replaces
State Code National Code Title Type
J189 ICP31012 Certificate III in Printing and Graphic Arts (Mail House) Qualification
Replaced By
State Code National Code Title Type
AZL5 ICP31315 Certificate III in Print Manufacturing Qualification
No information
Entry Requirements

Nil

Traineeships and Apprenticeships
No information