Unit of competency Outline
Date retreived
22/07/2026 1:47 PM AWST
22/07/2026 1:47 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Maintain a safe work environment
Maintain a safe work environment
Unit of competency
National Code
ICPSUP260
ICPSUP260
State Code
AUN93
AUN93
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
061301 - Occupational Health And Safety
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to ensure work health and safety (WHS) procedures are followed in environments where computers are predominately used, but which may include limited access to chemicals and solvents.It applies to individuals who perform a range of mainly routine tasks in various sectors of the printing and graphic arts industry, using limited practical skills and fundamental knowledge in a defined context. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Follow workplace safety procedures
- 1.1 Hazards in work area are recognised while under direct supervision and reported to appropriate people according to enterprise procedures
- 1.2 Enterprise procedures and work instructions for assessing and controlling risks for own area of responsibility are followed accurately while under direct supervision
- 1.3 Enterprise procedures for dealing with incidents (accidents), fire and other emergencies are followed whenever necessary under direct supervision within scope of responsibilities and competencies
2. Contribute to WHS in the workplace
- 2.1 WHS issues are raised with appropriate people according to enterprise procedures and relevant WHS legislation
- 2.2 Contributions to participative arrangements for WHS management in the workplace are made within organisational procedures and scope of responsibilities and competencies
- 2.3 Information matching trail is documented
- 2.4 Any discrepancies are reported to supervisor
3. Ensure workspace health and safety
- 3.1 Workspace, furniture and equipment are adjusted to suit ergonomic requirements of the individual
- 3.2 Lighting is adjusted and glare is reduced to ensure healthy lighting levels
- 3.3 Work organisation meets organisational and WHS requirements for computer operation
4. Ensure safety from environmental discharges/emissions
- 4.1 Chemicals and solvents are correctly stored and appropriate ventilation is available when using chemicals and solvents
- 4.2 Abnormal or unacceptable emission levels are recognised and reported according to enterprise procedures
- 4.3 Emission levels are monitored and measured according to standard operating procedures where appropriate
- 4.4 Correct safety procedures are followed and personal protective equipment used properly
- 4.5 Containment procedures are applied according to standard operating procedures where required
- 4.6 Waste removal from work area complies with enterprise procedures and environmental regulations
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D3256 | ICPSU260C | Maintain a safe work environment | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBQ74 | ICPSUP2600 | Maintain a safe work environment | Unit of competency |