Qualification Outline
22/07/2026 9:42 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Printing and Graphic Arts (Sacks and Bags)
Certificate III in Printing and Graphic Arts (Sacks and Bags)
ICP30815
AWC8
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 26/03/2015 | Current | Approved |
Description
This qualification applies to skilled operators who work as sacks and bags machinists. They prepare material, monitor and run a range of sack and bag equipment and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.
Licensing/Regulatory Information
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
Total number of units = Nineteen (19) unitsFour (4) core units, plus
Fifteen (15) elective units of which:
- Three (3) elective units must be from Group A
- Two (2) elective units must be from Group A or B
- Six (6) elective units must be from Group B
- the remaining Four (4) elective units may be selected from the remaining elective units, from other qualifications in this Training Package or any other endorsed Training Package, or from an accredited course at Certificate III or IV level.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome.
1. Core Units
All four (4) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AUO62 | ICPSUP262 | Communicate in the workplace | 50 | Unit of competency |
| AUO73 | ICPSUP216 | Inspect quality against required standards | 30 | Unit of competency |
| AUN93 | ICPSUP260 | Maintain a safe work environment | 30 | Unit of competency |
| AUK77 | BSBSUS201 | Participate in environmentally sustainable work practices | 10 | Unit of competency |
2. Group A Elective Units
At least three (3) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AUN70 | ICPKNW319 | Apply knowledge and processes of converting paper-based products | 80 | Unit of competency |
| AUO43 | ICPSUP323 | Dispose of waste | 30 | Unit of competency |
| AUJ68 | BSBWOR301 | Organise personal work priorities and development | 30 | Unit of competency |
| AUP36 | ICPSUP203 | Prepare and maintain the work area | 60 | Unit of competency |
| AUM65 | ICPSUP202 | Prepare, load and unload product on and off machine | 20 | Unit of competency |
| AUN55 | ICPSUP201 | Prepare, load and unload reels and cores on and off machine | 30 | Unit of competency |
| AUO52 | ICPCBF298 | Run and monitor sack and bag machines | 20 | Unit of competency |
| AUO78 | ICPSUP282 | Undertake basic machine maintenance | 30 | Unit of competency |
3. Group B Elective Units
At least six (6) units must be chosen from Group B.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| J187 | ICP30812 | Certificate III in Printing and Graphic Arts (Sacks and Bags) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZL5 | ICP31315 | Certificate III in Print Manufacturing | Qualification |
No information
Entry Requirements
Nil
Traineeships and Apprenticeships