Qualification Outline
22/07/2026 6:02 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Printing and Graphic Arts (Sacks and Bags)
Certificate III in Printing and Graphic Arts (Sacks and Bags)
ICP30812
J187
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 08/07/2012 | Current | Approved |
Description
This qualification applies to skilled operators who work in the sacks and bags area in the printing industry. They prepare material, monitor and run a range of sack and bag equipment and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.
Job Roles
Sack/bag machinist
Schedule
Packaging Rules
Total number of units = nineteen (19) unitsFour (4) core units plus
Five (5) elective units from Group A plus
Ten (10) elective units from Group B.
Up to two (2) elective units from Group A can be substituted with Group B elective units listed below.
Six (6) elective units must be selected from the Group B elective units.
Up to four (4) Group B elective units may be selected from the remaining elective units or from qualifications at the same qualification level or one level higher, in this Training Package or any other endorsed Training Package or accredited course.
Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs.
1. Core Units
All four (4) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3258 | ICPSU262C | Communicate in the workplace | 50 | Unit of competency |
| D3247 | ICPSU216C | Inspect quality against required standards | 30 | Unit of competency |
| D3256 | ICPSU260C | Maintain a safe work environment | 30 | Unit of competency |
| D1021 | BSBSUS201A | Participate in environmentally sustainable work practices | 10 | Unit of competency |
2. Group A Elective Units
Five (5) units to be chosen from Group A.
Please refer to the packaging rules for the full details of available options.
Note: ICPSU201C or ICPSU202C may be chosen, NOT both.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3094 | ICPKN319C | Apply knowledge and processes of converting paper-based products | 80 | Unit of competency |
| D3265 | ICPSU323C | Dispose of waste | 30 | Unit of competency |
| S8084 | BSBWOR301B | Organise personal work priorities and development | 30 | Unit of competency |
| D3250 | ICPSU224C | Perform basic machine maintenance | 30 | Unit of competency |
| D3251 | ICPSU225C | Perform small machine maintenance | 30 | Unit of competency |
| D3242 | ICPSU203C | Prepare and maintain the work area | 60 | Unit of competency |
| D3241 | ICPSU202C | Prepare, load and unload product on and off machine | 20 | Unit of competency |
| D3240 | ICPSU201C | Prepare, load and unload reels and cores on and off machine | 30 | Unit of competency |
| D3041 | ICPCF298C | Run and monitor sack and bag machines | 20 | Unit of competency |
3. Group B Elective Units
Ten (10) units to be chosen from Group B.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W779 | ICP30810 | Certificate III in Printing and Graphic Arts (Sacks and Bags) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWC8 | ICP30815 | Certificate III in Printing and Graphic Arts (Sacks and Bags) | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships