Pathway Outline
Date retreived
22/07/2026 9:16 AM AWST
22/07/2026 9:16 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Painting and Decorating
Pre-Apprenticeship - Painting and Decorating
Pathway
National Code
—
—
State Code
WA55
WA55
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
19/05/2011
19/05/2011
Field of Education
0403 - Building
0403 - Building
Approved Date
15/07/2009
15/07/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
1.00
1.00
Current Release Date
19/05/2011
19/05/2011
Nominal Hours
600
600
Description
NOTE: Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
This Training Program leads to the completion of the Pre-Apprenticeship (Painting and Decorating) (WA55) Pathway and the CPC08 Construction and Plumbing Services Training Package qualification CPC10108 Certificate I in Construction.
This program is designed to prepare a person to perform a prescribed range of practical skills involving known routines and procedures.
This Training Program leads to the completion of the Pre-Apprenticeship (Painting and Decorating) (WA55) Pathway and the CPC08 Construction and Plumbing Services Training Package qualification CPC10108 Certificate I in Construction.
This program is designed to prepare a person to perform a prescribed range of practical skills involving known routines and procedures.
Packaging Rules
1. Compulsory units
10 units of competency are required for award of this qualification:
- 7 compulsory units
- 3 elective units
A maximum of one of the three required elective units below may be substituted by selecting a relevant unit of competency from any Certificate I or II construction qualification or qualification in another endorsed Training Package.
- 7 compulsory units
- 3 elective units
A maximum of one of the three required elective units below may be substituted by selecting a relevant unit of competency from any Certificate I or II construction qualification or qualification in another endorsed Training Package.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9366 | CPCCCM1004A | Conduct workplace communication | 16 | Unit of competency |
| W9365 | CPCCCM1003A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| W9601 | CPCCVE1001A | Undertake a basic construction project | 24 | Unit of competency |
| W9374 | CPCCCM2005A | Use construction tools and equipment | 40 | Unit of competency |
| W9364 | CPCCCM1002A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
2. Support Units
Complete the following units. Units from other endorsed Training Packages or accredited courses may be used to provide language/literacy/numeracy development and/or support in place of the units listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D0628 | BSBCMM101A | Apply basic communication skills | 40 | Unit of competency |
| D1025 | BSBWOR202A | Organise and complete daily work activities | 15 | Unit of competency |
| W2823 | AURC251356A | Read in the workplace | 12 | Unit of competency |
| W2824 | AURC251677A | Use numbers in the workplace | 20 | Unit of competency |
3. Work Placement/Project Units
Complete ALL of the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 50647 | Undertake a Basic Project - 1 | 40 | Module | |
| 50648 | Undertake a Basic Project - 2 | 40 | Module | |
| 50649 | Undertake a Basic Project - 3 | 40 | Module | |
| 50650 | Undertake a Work Placement - 1 | 40 | Module | |
| 50651 | Undertake a Work Placement - 2 | 40 | Module |
4. Elective Units
Complete the following 3 electives
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9375 | CPCCCM2006A | Apply basic levelling procedures | 16 | Unit of competency |
| W9367 | CPCCCM1005A | Carry out measurements and calculations | 16 | Unit of competency |
| W9363 | CPCCCM1001A | Undertake basic estimation and costing | 14 | Unit of competency |
5. Additional Technical Units
Additional Units - Pre-apprentices completing the requirements of additional units will receive Statements of Attainment for any additional competencies completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9377 | CPCCCM2008A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| W9470 | CPCCPD3001A | Prepare surfaces for painting | 56 | Unit of competency |
| W9468 | CPCCPD2002A | Use painting and decorating tools and equipment | 40 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA55 | Pre-Apprenticeship - Painting and Decorating | Pathway | |
| WA03 | Pre-Apprenticeship (Painting and Decorating) | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA55 | Pre-Apprenticeship - Painting and Decorating | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification CPC08 qualification code CPC10108.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements
Further information on this training program may be obtained from the Curriculum consultant at Swan TAFE. 22/07/2009.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements
Further information on this training program may be obtained from the Curriculum consultant at Swan TAFE. 22/07/2009.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
No information