Pathway Outline
Date retreived
22/07/2026 6:00 AM AWST
22/07/2026 6:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Building Maintenance
Building Maintenance
Pathway
National Code
—
—
State Code
WB48
WB48
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
19/05/2011
19/05/2011
Field of Education
0403 - Building
0403 - Building
Approved Date
06/10/2011
06/10/2011
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
19/05/2011
19/05/2011
Nominal Hours
512
512
Description
This Traineeship program in building maintenance provides limited articulation.
It is targeted to remote, indigenous and disengaged students and communities in order to provide the skills and abilities which will allow the cohort to work within their own communities.
This training program leads to the completion of the qualification CPC20111, Certificate II in Construction.
It is targeted to remote, indigenous and disengaged students and communities in order to provide the skills and abilities which will allow the cohort to work within their own communities.
This training program leads to the completion of the qualification CPC20111, Certificate II in Construction.
Packaging Rules
1. Core Units
All nine (9) units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9375 | CPCCCM2006A | Apply basic levelling procedures | 16 | Unit of competency |
| W9435 | CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | 32 | Unit of competency |
| D7357 | CPCCCO2013A | Carry out concreting to simple forms | 24 | Unit of competency |
| D7350 | CPCCCM1015A | Carry out measurements and calculations | 16 | Unit of competency |
| D7349 | CPCCCM1014A | Conduct workplace communication | 16 | Unit of competency |
| D7348 | CPCCCM1013A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| W9374 | CPCCCM2005A | Use construction tools and equipment | 40 | Unit of competency |
| D7347 | CPCCCM1012A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
2. Electives - Site Preparation
A total of 6 elective units are required from Group 2, 3 and 4 - Select at least one from this group (Group 2):
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9378 | CPCCCM2009A | Carry out basic demolition | 16 | Unit of competency |
| W9371 | CPCCCM2002A | Carry out excavation | 16 | Unit of competency |
| WB552 | RIIWMG203A | Drain and dewater civil construction site | 12 | Unit of competency |
3. Electives - Site Support
A total of 6 elective units are required from Group 2, 3 and 4 - Select at least one from this group (Group 3):
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9377 | CPCCCM2008A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| D7352 | CPCCCM2010A | Work safely at heights | 16 | Unit of competency |
4. Electives - Trade Prepartion
A total of 6 elective units are required from Group 2, 3 and 4 - Select at least one from this group (Group 4):
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9603 | CPCCWC2001A | Complete penetrations and flashings | 8 | Unit of competency |
| W9339 | CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground | 32 | Unit of competency |
| W9504 | CPCCSF2004A | Place and fix reinforcement materials | 40 | Unit of competency |
| W9543 | CPCCSP2003A | Prepare surfaces for plastering | 24 | Unit of competency |
| D7384 | CPCCPD2013A | Remove and replace doors and door and window components | 10 | Unit of competency |
5. Additional units
Choose unit(s) from the following list or appropriate units from a Certificate III trade qualification from CPC08, making sure that the TOTAL number of hours for the Pathway do not exceed 512 hours. Note that these units contribute to a Statement of Attainment, over and above the units required to achieve CPC20111 Certificate II in Construction.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9385 | CPCCCO2004A | Carry out concrete work | 40 | Unit of competency |
| W9442 | CPCCPB3002A | Fix standard plasterboard ceiling sheets | 40 | Unit of competency |
| W9441 | CPCCPB3001A | Fix standard plasterboard wall sheets | 40 | Unit of competency |
| W9373 | CPCCCM2004A | Handle construction materials | 16 | Unit of competency |
| W9363 | CPCCCM1001A | Undertake basic estimation and costing | 14 | Unit of competency |
| W9319 | CPCCBL2002A | Use bricklaying and blocklaying tools and equipment | 30 | Unit of competency |
| W9468 | CPCCPD2002A | Use painting and decorating tools and equipment | 40 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA78 | Building Maintenance | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB81 | Building Maintenance | Pathway |
Note
1. This training program has been created as a pathway of the Training Package Training Package Construction, Plumbing and Services Integrated Framework
(CPC08) qualification code CPC20111.
2. Further information on this training program may be obtained from the Building and Construction Industry Training Fund on 9244-0100.
3. This is a traineeship program that was originally proposed by Fairbridge for implementation in STARS on 28/5/2009.
4. The program has been created on STARS as a replacement for WA78 (CPC20108), which superseded WT96 on 11/2/2010.
5. Group 5 has been modified to include appropriate units from a Certificate III trade qualification from CPC08 (Requested by Ric Johnson,Construction Training Council, Jan 2013).
(CPC08) qualification code CPC20111.
2. Further information on this training program may be obtained from the Building and Construction Industry Training Fund on 9244-0100.
3. This is a traineeship program that was originally proposed by Fairbridge for implementation in STARS on 28/5/2009.
4. The program has been created on STARS as a replacement for WA78 (CPC20108), which superseded WT96 on 11/2/2010.
5. Group 5 has been modified to include appropriate units from a Certificate III trade qualification from CPC08 (Requested by Ric Johnson,Construction Training Council, Jan 2013).
Entry Requirements
Not Applicable
(TR09420) BUILDING MAINTENANCE (LEVEL 2)
Traineeship