Pathway Outline
Date retreived
22/07/2026 2:07 PM AWST
22/07/2026 2:07 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Furniture
Furniture
Pathway
National Code
—
—
State Code
WA83
WA83
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
04/10/2011
04/10/2011
Field of Education
0301 - Manufacturing Engineering And Technology
0301 - Manufacturing Engineering And Technology
Approved Date
03/11/2009
03/11/2009
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
5 Semesters
Current Release Version
2.00
2.00
Current Release Date
04/10/2011
04/10/2011
Nominal Hours
812
812
Description
This qualification covers the skills and knowledge required to perform a range of skills associated with the manufacture and installation of free-standing and fitted furniture.
Packaging Rules
1. Year One
To be awarded the Certificate III in Cabinet Making, competency must be achieved in twenty seven (27) units.
Units must be selected according to the rules described below.
Assessment must be in accordance with the Assessment Guidelines.
- 6 mandatory units must be completed
- 18 specialist units must be completed
- 3 other electives must be completed
Units must be selected according to the rules described below.
Assessment must be in accordance with the Assessment Guidelines.
- 6 mandatory units must be completed
- 18 specialist units must be completed
- 3 other electives must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8608 | LMFFM2011B | Apply manufactured board conversion techniques | 16 | Unit of competency |
| W8600 | LMFFM2002B | Assemble furnishing components | 24 | Unit of competency |
| W8496 | LMFCR0003B | Carry out measurements and calculations | 20 | Unit of competency |
| W8281 | MSAPMSUP102A | Communicate in the workplace | 26 | Unit of competency |
| W8603 | LMFFM2006B | Hand make timber joints | 36 | Unit of competency |
| W8602 | LMFFM2005B | Join solid timber | 8 | Unit of competency |
| W8509 | LMFFF2004B | Prepare surfaces for finishing | 16 | Unit of competency |
| W8695 | LMFGN3001B | Read and interpret work documents | 24 | Unit of competency |
| W8607 | LMFFM2010B | Set up, operate and maintain basic static machines | 56 | Unit of competency |
| W8599 | LMFFM2001B | Use furniture making sector hand and power tools | 38 | Unit of competency |
| W8282 | MSAPMSUP106A | Work in a team | 26 | Unit of competency |
| W8249 | MSAPMOHS200A | Work safely | 26 | Unit of competency |
2. Year Two
Undertake the units as follows:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8611 | LMFFM3002B | Construct furniture using leg and rail method | 40 | Unit of competency |
| W8614 | LMFFM3005B | Fabricate custom furniture | 52 | Unit of competency |
| W8615 | LMFFM3006B | Install furnishing | 20 | Unit of competency |
| W8616 | LMFFM3007B | Prepare and apply decorative surfaces for furniture | 20 | Unit of competency |
| W8619 | LMFFM3012B | Prepare cutting list from plans and job specifications | 16 | Unit of competency |
| W8612 | LMFFM3003B | Produce angled and curved furniture using manufactured board | 64 | Unit of competency |
| W8618 | LMFFM3011B | Produce manual and computer-aided production drawings | 52 | Unit of competency |
| W8621 | LMFFM3020B | Set up, operate and maintain sawing machines | 20 | Unit of competency |
3. Year Three
Undertake the units as follows:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8633 | LMFFM3033B | Construct jigs and fixtures | 34 | Unit of competency |
| W8696 | LMFGN3002B | Estimate and cost job | 16 | Unit of competency |
| W8620 | LMFFM3013B | Measure and draw site layout for manufactured furniture products | 16 | Unit of competency |
| W8613 | LMFFM3004B | Produce angled and curved furniture using solid timber | 64 | Unit of competency |
| W8825 | LMFFM2003B | Select and apply hardware | 16 | Unit of competency |
| W8617 | LMFFM3010B | Select timbers for furniture production | 10 | Unit of competency |
| W8631 | LMFFM3031B | Set up, operate and maintain CNC machining and processing centres | 56 | Unit of competency |
No information
Note
This training program has been created as a pathway of the Training Package qualification LMF32109.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements.
Further information on this training program may be obtained from Yvette Chapman, email: Yvette.Chapman@swrc.wa.edu.au, South West Regional College, Bunbury WA.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements.
Further information on this training program may be obtained from Yvette Chapman, email: Yvette.Chapman@swrc.wa.edu.au, South West Regional College, Bunbury WA.
Entry Requirements
Not applicable.