Qualification Outline

Date retreived
22/07/2026 4:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate IV in Sustainable Operations

Certificate IV in Sustainable Operations

Qualification
National Code:
MSS40111
State Code:
D550
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
13/12/2013
Approved Date
14/09/2011
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
392
Duration
1 Semester
Current Release Number
3.00
Current Release Date
13/12/2013
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
3.00 13/12/2013 Current Approved
Description

This qualification provides the skills and knowledge required to lead the implementation of sustainability related initiatives in a section of an organisation. The qualification has been developed with manufacturing operations as a focus. However, because of the range of organisations in a typical manufacturing value chain it may also be applied to other types of organisations. The qualification is also appropriate for a technician or similar person who as part of a broader job role needs to undertake sustainability related work.
The qualification packaging has been developed on an assumption that competency will be developed through a combination of on and off-the-job learning strategies.
Job roles/employment outcomes
The MSS40111 Certificate IV in Sustainable Operations specifies the competencies required to identify, implement and report on sustainability related initiatives within a section of an enterprise, such as a defined work area, work team or stage of production. It may also apply to a small or medium enterprise. It includes assisting organisations to meet their obligations under sustainability related regulatory arrangements, government or similar incentives or other initiatives that apply to the employee’s area of operation.
The qualification also applies where an overview of sustainability related issues is required without the detailed technical underpinning skills, such as resource (e.g. water and carbon) mapping along a value chain, or mass balancing across a site or large enterprise. Where these skills are require the MSS50111 Diploma of Sustainable Operations should be considered.
Employment outcomes related to this qualification may include specialist roles such as a sustainability officer or sustainability project assistant. The qualification also provides specialist sustainability competencies to technical, supervisory or operational employees who do not have whole of enterprise responsibilities.
Application
This qualification provides sustainability skills that can be applied in the following organisations and environments:
manufacturing enterprises
organisations in a manufacturing value chain, such as:
suppliers
customers
distributors, warehouses, transport suppliers and other logistics support organisations
professional service suppliers to manufacturing, for example, legal, engineering, accounting, auditing and education and training suppliers.

Schedule
Packaging Rules
To be awarded the MSS40111 Certificate IV in Sustainable Operations, competency must be achieved in ten (10) units of competency.
- three (3) core units of competency
- seven (7) elective units of competency, as specified.

Elective units of competency
- Complete seven (7) units of competency, made up of:
- a minimum of three (3) units from Group A
- the balance of units, to a maximum of four (4 ), may be selected from:
- Group A units, not previously selected
- Group B units list in the qualification outline

A maximum of two (2) Group B elective units may be selected from this Training Package, other endorsed Training Packages and accredited courses, where those units are available for inclusion at Certificate IV level.
1. Core Units

Three (3) units must be completed

State Code National Code Title Hours Type
D7725 MSS014002A Evaluate sustainability impact of a work or process area 40 Unit of competency
D3656 MSAENV472B Implement and monitor environmentally sustainable work practices 40 Unit of competency
D7724 MSS014001A Improve sustainability through readily implementable change 40 Unit of competency
2. Group A Specialist Elective Units

A minimum of three (3) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
D7757 MSS024003A Apply an understanding of environmental principles to a site 140 Unit of competency
WA677 MSL933003A Apply critical control point requirements 40 Unit of competency
W8296 MSAPMSUP301A Apply HACCP to the workplace 30 Unit of competency
D7728 MSS014005A Apply proactive maintenance strategies to sustainability 40 Unit of competency
WA371 LMFFDT4003A Assess and record the lifecycle of a product 25 Unit of competency
W8258 MSAPMOHS401A Assess risk 60 Unit of competency
WD543 MSS404082A Assist in implementing a proactive maintenance strategy 50 Unit of competency
D7729 MSS014006A Contribute to sustainability related audits 70 Unit of competency
WA679 MSL934001A Contribute to the ongoing development of HACCP plans 40 Unit of competency
D7734 MSS015005A Develop required sustainability reports 80 Unit of competency
D7727 MSS014004A Develop team strategies for more sustainable use of resources 40 Unit of competency
D7756 MSS024002A Implement environmental management plans and procedures 45 Unit of competency
WI695 MSS014007A Implement social sustainability in work practices 35 Unit of competency
D7726 MSS014003A Optimise sustainability of a process or plant area 60 Unit of competency
W8959 PMASUP520B Review procedures to minimise environmental impact of process 40 Unit of competency
WD544 MSS404083A Support proactive maintenance 50 Unit of competency
WA723 MSL974007A Undertake environmental field-based monitoring 60 Unit of competency
WA725 MSL974009A Undertake field-based, remote-sensing monitoring 60 Unit of competency
3. Group B Other Elective Units

The balance of units, to a maximum of four (4 ), may be selected from Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
WD501 MSS402030A Apply cost factors to work practices 35 Unit of competency
WD538 MSS404052A Apply statistics to operational processes 40 Unit of competency
W5432 MEM30016A Assist in the analysis of a supply chain 40 Unit of competency
W7333 LMTGN4016A Contribute to the development of products or processes 100 Unit of competency
D7712 MSS027001A Coordinate environmental management activities 100 Unit of competency
WD530 MSS403040A Facilitate and improve implementation of 5S 50 Unit of competency
WD531 MSS403041A Facilitate breakthrough improvements 40 Unit of competency
WD518 MSS403010A Facilitate change in an organisation implementing competitive systems and practices 50 Unit of competency
WD519 MSS403011A Facilitate implementation of competitive systems and practices 40 Unit of competency
WD540 MSS404060A Facilitate the use of planning software systems in a work area or team 50 Unit of competency
WD541 MSS404061A Facilitate the use of SCADA systems in a team or work area 50 Unit of competency
WD515 MSS403005A Facilitate use of a Balanced Scorecard for performance improvement 40 Unit of competency
D0995 BSBRSK401A Identify risk and apply risk management processes 40 Unit of competency
WD513 MSS403001A Implement competitive systems and practices 50 Unit of competency
WD524 MSS403030A Improve cost factors in work practices 50 Unit of competency
WD520 MSS403013A Lead team culture improvement 40 Unit of competency
WD535 MSS403051A Mistake proof an operational process 50 Unit of competency
WD522 MSS403023A Monitor a levelled pull system of operations 50 Unit of competency
W7322 LMTGN4002A Participate in product engineering 80 Unit of competency
W8644 LMFFT4007B Sample, inspect and test products to specifications 36 Unit of competency
W5504 MEM13002B Undertake occupational health and safety activities in the workplace 27 Unit of competency
WD542 MSS404081A Undertake proactive maintenance analyses 50 Unit of competency
WD537 MSS404050A Undertake process capability improvements 50 Unit of competency
WD511 MSS402080A Undertake root cause analysis 30 Unit of competency
WD509 MSS402060A Use planning software systems in operations 30 Unit of competency
WD510 MSS402061A Use SCADA systems in operations 30 Unit of competency
WD539 MSS404053A Use six sigma techniques 40 Unit of competency
Replaced By
State Code National Code Title Type
BCU1 MSS40116 Certificate IV in Sustainable Operations Qualification
No information
Entry Requirements

This qualification has no formal entry requirements.

Traineeships and Apprenticeships
No information