Pathway Outline
Date retreived
22/07/2026 7:54 AM AWST
22/07/2026 7:54 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fitting
Fitting
Pathway
National Code
—
—
State Code
AD58
AD58
DTWD Status
Approved
Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
26/06/2019
26/06/2019
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
02/07/2021
02/07/2021
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
8 Semesters
Current Release Version
4.00
4.00
Current Release Date
04/09/2025
04/09/2025
Nominal Hours
864
864
Description
This qualification defines the skills and knowledge required of an engineering tradesperson - mechanical within metal, engineering, manufacturing and associated industries. The qualification has been specifically developed for apprentices in the above trade.
This qualification must be undertaken through a Training Contract or through formal trade recognition assessment processes.
The skills associated with this qualification are intended to apply to a wide range of mechanical trade work, including undertaking fitting, assembly, manufacture, installation, modification, testing, fault finding, maintenance and service of mechanical equipment, machinery and the use of machine tools.
This qualification is designed to provide an industry recognised skills profile related to trade work as an Engineering Tradesperson - Mechanical.
Assessment of some units of competency must, where indicated, include evidence of the candidate’s performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.
In some jurisdictions units in this qualification may relate to licensing or regulatory requirements. Local regulations should be checked.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
There are no entry requirements for this qualification.
This qualification must be undertaken through a Training Contract or through formal trade recognition assessment processes.
The skills associated with this qualification are intended to apply to a wide range of mechanical trade work, including undertaking fitting, assembly, manufacture, installation, modification, testing, fault finding, maintenance and service of mechanical equipment, machinery and the use of machine tools.
This qualification is designed to provide an industry recognised skills profile related to trade work as an Engineering Tradesperson - Mechanical.
Assessment of some units of competency must, where indicated, include evidence of the candidate’s performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.
In some jurisdictions units in this qualification may relate to licensing or regulatory requirements. Local regulations should be checked.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
There are no entry requirements for this qualification.
Packaging Rules
To be awarded the MEM30219 Certificate III in Engineering - Mechanical Trade (Fitting), units of competency to the value of ninety-six (96) points must be achieved, chosen as outlined below:
- core units of competency listed below (totalling thirty-three (33) points)
- elective units of competency to a minimum value of forty (40) points from Group B electives as described below
- elective units of competency to a maximum value of twenty-three (23) points from Group D to bring the total value to ninety-six (96) points.
Appropriate Group D elective units to the value of eight (8) points may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Only select units that would be suitable for occupational outcomes in a mechanical trade environment.
Registered Training Organisations (RTOs) must seek a determination from the industry parties in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses. Determination of points requests are to be submitted to the industry parties through Manufacturing Industry Skills Alliance. Refer to the MEM Companion Volume Implementation Guide for information on determination of unit points values.
Points associated with prerequisites count towards the total. Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
- core units of competency listed below (totalling thirty-three (33) points)
- elective units of competency to a minimum value of forty (40) points from Group B electives as described below
- elective units of competency to a maximum value of twenty-three (23) points from Group D to bring the total value to ninety-six (96) points.
Appropriate Group D elective units to the value of eight (8) points may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Only select units that would be suitable for occupational outcomes in a mechanical trade environment.
Registered Training Organisations (RTOs) must seek a determination from the industry parties in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses. Determination of points requests are to be submitted to the industry parties through Manufacturing Industry Skills Alliance. Refer to the MEM Companion Volume Implementation Guide for information on determination of unit points values.
Points associated with prerequisites count towards the total. Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
1. Core Units
These units must be completed.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAU96 | MEM17003 | Assist in the provision of on-the-job training | 18 | Unit of competency |
| OAV03 | MEM16008 | Interact with computing technology | 18 | Unit of competency |
| OAV96 | MEM09002 | Interpret technical drawing | 36 | Unit of competency |
| OAV04 | MEM16006 | Organise and communicate information | 18 | Unit of competency |
| AWC13 | MSMENV272 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| OAV34 | MEM12024 | Perform computations | 27 | Unit of competency |
| OAV35 | MEM12023 | Perform engineering measurements | 48 | Unit of competency |
| OAV19 | MEM14006 | Plan work activities | 32 | Unit of competency |
| OAV60 | MEM11011 | Undertake manual handling | 18 | Unit of competency |
| OAU93 | MEM18001 | Use hand tools | 18 | Unit of competency |
| OAU92 | MEM18002 | Use power tools/hand held operations | 18 | Unit of competency |
| OAV23 | MEM13015 | Work safely and effectively in manufacturing and engineering | 32 | Unit of competency |
2. Group A Machining Trade Specialisation
To be awarded the generic qualification, choose units to a minimum value of forty (40) points from Groups A, B and C.
To be awarded the Machining Trade specialisation, choose units to a minimum value of forty (40) points from Group A.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
To be awarded the Machining Trade specialisation, choose units to a minimum value of forty (40) points from Group A.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
3. Group B Fitting Trade Specialisation
To be awarded the generic qualification, choose units to a minimum value of forty (40) points from Groups A, B and C.
To be awarded the Fitting Trade specialisation, choose units to a minimum value of forty (40) points from Group B.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
To be awarded the Fitting Trade specialisation, choose units to a minimum value of forty (40) points from Group B.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
4. Group C Fitting/Machining Trade Specialisation
To be awarded the generic qualification, choose to a minimum value of forty (40) points from Groups A, B and C.
To be awarded the Fitting/Machining Trade specialisation, choose units to a minimum value of forty (40) points from Group C.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
To be awarded the Fitting/Machining Trade specialisation, choose units to a minimum value of forty (40) points from Group C.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
5. Group D General Elective Units
To be awarded the generic qualification, choose units to a maximum value of twenty three (23) points from Group D.
To be awarded a Trade specialisation, choose units to a maximum value of twenty three (23) points from Group D.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
To be awarded a Trade specialisation, choose units to a maximum value of twenty three (23) points from Group D.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WT86 | Mechanical Fitter ZA | Pathway |
Note
No information
Entry Requirements
There are no entry requirements for this qualification.