Pathway Outline
Date retreived
22/07/2026 7:51 AM AWST
22/07/2026 7:51 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Performance
Performance
Pathway
National Code
—
—
State Code
AE57
AE57
DTWD Status
Approved
Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
16/04/2021
16/04/2021
Field of Education
1001 - Performing Arts
1001 - Performing Arts
Approved Date
26/11/2021
26/11/2021
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
3.00
3.00
Current Release Date
13/08/2025
13/08/2025
Nominal Hours
560
560
Description
This qualification reflects the role of individuals who apply solutions to a defined range of unpredictable problems, and analyse and evaluate information from a variety of sources. They use well-developed skills and a broad knowledge base in music performance, music creation and composition, sound production, or music business contexts. They may provide leadership and guidance to others and have limited responsibility for the output of others.
The job roles that relate to this qualification may include singer/songwriter, music marketing and promotions officer, sound recordist, sound technician, booking agent (music) and musician.
Licensing, legislative, regulatory or certification considerations
National Standard for Licensing Persons Performing High Risk Work
The National Standard for Licensing Persons Performing High Risk Work applies to persons performing dogging and rigging work. Completion of the following units is required for certification at either basic, intermediate or advanced levels:
- CPCCLDG3001 Licence to perform dogging
- CPCCLRG3001 Licence to perform rigging basic level
- CPCCLRG3002 Licence to perform rigging intermediate level
- CPCCLRG4001 Licence to perform rigging advanced level.
National Code of Practice for Induction for Construction Work
Sets and staging for some performances or events may fall within the definition of construction work. If so, people entering the construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007). Achievement of the unit CPCCWHS1001 Prepare to work safely in the construction industry from the CPC Construction, Plumbing and Services Training Package fulfils this requirement.
Units of competency in qualification
Some individual units of competency may have their own licensing, legislative, regulatory or certification requirements. Users must check individual units of competency for licensing, legislative, regulatory or certification requirements relevant to that unit.
The job roles that relate to this qualification may include singer/songwriter, music marketing and promotions officer, sound recordist, sound technician, booking agent (music) and musician.
Licensing, legislative, regulatory or certification considerations
National Standard for Licensing Persons Performing High Risk Work
The National Standard for Licensing Persons Performing High Risk Work applies to persons performing dogging and rigging work. Completion of the following units is required for certification at either basic, intermediate or advanced levels:
- CPCCLDG3001 Licence to perform dogging
- CPCCLRG3001 Licence to perform rigging basic level
- CPCCLRG3002 Licence to perform rigging intermediate level
- CPCCLRG4001 Licence to perform rigging advanced level.
National Code of Practice for Induction for Construction Work
Sets and staging for some performances or events may fall within the definition of construction work. If so, people entering the construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007). Achievement of the unit CPCCWHS1001 Prepare to work safely in the construction industry from the CPC Construction, Plumbing and Services Training Package fulfils this requirement.
Units of competency in qualification
Some individual units of competency may have their own licensing, legislative, regulatory or certification requirements. Users must check individual units of competency for licensing, legislative, regulatory or certification requirements relevant to that unit.
Packaging Rules
Total number of units = Fourteen (14)
- four (4) core units plus
- ten (10) elective units, of which:
- at least eight (8) must be from the elective units listed below, with no more than three (3) of these units selected from Group E
- up to two (2) may be from the remaining listed elective units (with the exception of Group E) or from this or any other currently endorsed Certificate III or above training package qualification or accredited course.
Elective units must be relevant to the work environment and the qualification, maintain the overall integrity of the AQF alignment, not duplicate the outcome of another unit chosen for the qualification, and contribute to a valid industry-supported vocational outcome.
Where relevant, the choice of elective units set out in the packaging rules above can serve to provide the qualification with one of the following specialisations. The rules to achieve a specialisation are detailed at qualification end.
- Performance
- Creation and Composition
- Sound Production
- Business
Specialisations
The achievement of a specialisation will be identified on testamurs as follows:
- CUA40920 Certificate IV in Music (Performance)
- CUA40920 Certificate IV in Music (Creation and Composition)
- CUA40920 Certificate IV in Music (Sound Production)
- CUA40920 Certificate IV in Music (Business)
Packaging rules to achieve a specialisation
Performance
- five (5) Group A elective units coded CUAMPF must be selected
Creation and Composition
- five (5) Group B elective units must be selected
Sound Production
- five (5) Group C elective units coded CUASOU must be selected
Business
- five (5) Group D elective units must be selected, at least four (4) of which must be coded CUA.
- four (4) core units plus
- ten (10) elective units, of which:
- at least eight (8) must be from the elective units listed below, with no more than three (3) of these units selected from Group E
- up to two (2) may be from the remaining listed elective units (with the exception of Group E) or from this or any other currently endorsed Certificate III or above training package qualification or accredited course.
Elective units must be relevant to the work environment and the qualification, maintain the overall integrity of the AQF alignment, not duplicate the outcome of another unit chosen for the qualification, and contribute to a valid industry-supported vocational outcome.
Where relevant, the choice of elective units set out in the packaging rules above can serve to provide the qualification with one of the following specialisations. The rules to achieve a specialisation are detailed at qualification end.
- Performance
- Creation and Composition
- Sound Production
- Business
Specialisations
The achievement of a specialisation will be identified on testamurs as follows:
- CUA40920 Certificate IV in Music (Performance)
- CUA40920 Certificate IV in Music (Creation and Composition)
- CUA40920 Certificate IV in Music (Sound Production)
- CUA40920 Certificate IV in Music (Business)
Packaging rules to achieve a specialisation
Performance
- five (5) Group A elective units coded CUAMPF must be selected
Creation and Composition
- five (5) Group B elective units must be selected
Sound Production
- five (5) Group C elective units coded CUASOU must be selected
Business
- five (5) Group D elective units must be selected, at least four (4) of which must be coded CUA.
1. Core units
All four (4) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| ODH59 | CUAIND411 | Extend expertise in specialist creative fields | 45 | Unit of competency |
| OAO71 | CUACMP311 | Implement copyright arrangements | 40 | Unit of competency |
| OCF51 | BSBESB301 | Investigate business opportunities | 25 | Unit of competency |
| ODG55 | CUAMWB402 | Manage feedback on creative practice | 35 | Unit of competency |
2. Group A - Performance Elective Units
Up to ten (10) units may be selected from Group A.
To achieve the specialisation, Performance, five (5) Group A units coded CUAMPF must be selected.
Please refer to the packaging rules for the full details of available options.
To achieve the specialisation, Performance, five (5) Group A units coded CUAMPF must be selected.
Please refer to the packaging rules for the full details of available options.
3. Group B - Creation and Composition Elective Units
Up to ten (10) units may be selected from Group B.
To achieve the specialisation Creation and Composition, five (5) Group B units must be selected.
Please refer to the packaging rules for the full details of available options.
To achieve the specialisation Creation and Composition, five (5) Group B units must be selected.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| ODE21 | CUAMCP412 | Compose musical pieces | 34 | Unit of competency |
| ODF29 | CUAMCP311 | Create simple musical compositions | 30 | Unit of competency |
| ODH88 | CUAMCP313 | Create simple musical pieces using music technology | 35 | Unit of competency |
| ODF03 | CUAMLT311 | Develop and apply aural perception skills | 45 | Unit of competency |
| ODG57 | CUAMPF415 | Develop and apply instrumental techniques | 34 | Unit of competency |
| ODG73 | CUAMCP411 | Develop techniques for arranging music | 34 | Unit of competency |
| ODD61 | CUASOU417 | Edit sound | 65 | Unit of competency |
| ODI04 | CUASOU419 | Mix recorded music | 50 | Unit of competency |
| ODE85 | CUASOU317 | Record and mix basic music demos | 40 | Unit of competency |
| ODE33 | CUASOU415 | Record sound | 60 | Unit of competency |
| ODH87 | CUAMCP312 | Write song lyrics | 30 | Unit of competency |
4. Group C - Sound Production Elective Units
Up to ten (10) units may be selected from Group C.
To achieve the specialisation Sound Production, five (5) Group C units coded CUASOU must be selected.
Please refer to the packaging rules for the full details of available options.
To achieve the specialisation Sound Production, five (5) Group C units coded CUASOU must be selected.
Please refer to the packaging rules for the full details of available options.
5. Group D - Business Elective Units
Up to ten (10) units may be selected from Group D.
To achieve the specialisation Business, five (5) Group D units must be selected, at least four (4) of which must be coded CUA.
Please refer to the packaging rules for the full details of available options.
To achieve the specialisation Business, five (5) Group D units must be selected, at least four (4) of which must be coded CUA.
Please refer to the packaging rules for the full details of available options.
6. Group E - General Elective Units
No more than three (3) units may be selected from the Group E electives.
Please refer to the packaging rules for the full details of available options.
Please refer to the packaging rules for the full details of available options.
No information
Note
No information
No information