Pathway Outline
Date retreived
22/07/2026 6:28 AM AWST
22/07/2026 6:28 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Sound Production
Sound Production
Pathway
National Code
—
—
State Code
AA74
AA74
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
15/01/2016
15/01/2016
Field of Education
1001 - Performing Arts
1001 - Performing Arts
Approved Date
21/07/2016
21/07/2016
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2018
20/12/2018
Nominal Hours
757
757
Description
This qualification reflects the role of individuals who have a sound theoretical knowledge base and use a range of specialised, technical or managerial competencies to plan, carry out and evaluate their own work, and/or that of a team, in their chosen field in the music industry.
Licensing/Regulatory Information
National Standard for Licensing Persons Performing High Risk Work
The National Standard for Licensing Persons Performing High Risk Work applies to persons performing dogging and rigging work. Completion of the following units is required for certification at either basic, intermediate or advanced levels:
CPCCLDG3001A Licence to perform dogging
CPCCLRG3001A Licence to perform rigging basic level
CPCCLRG3002A Licence to perform rigging intermediate level
CPCCLRG4001A Licence to perform rigging advanced level.
National Code of Practice for Induction for Construction Work
Sets and staging for some performances or events may fall within the definition of construction work. If so, people entering the construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007). Achievement of the unit CPCCOHS1001A Work safely in the construction industry from the CPC08 Construction, Plumbing and Services Training Package fulfils this requirement.
Licensing/Regulatory Information
National Standard for Licensing Persons Performing High Risk Work
The National Standard for Licensing Persons Performing High Risk Work applies to persons performing dogging and rigging work. Completion of the following units is required for certification at either basic, intermediate or advanced levels:
CPCCLDG3001A Licence to perform dogging
CPCCLRG3001A Licence to perform rigging basic level
CPCCLRG3002A Licence to perform rigging intermediate level
CPCCLRG4001A Licence to perform rigging advanced level.
National Code of Practice for Induction for Construction Work
Sets and staging for some performances or events may fall within the definition of construction work. If so, people entering the construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007). Achievement of the unit CPCCOHS1001A Work safely in the construction industry from the CPC08 Construction, Plumbing and Services Training Package fulfils this requirement.
Packaging Rules
Total number of units = sixteen (16)
- four (4) core units plus
- twelve (12) elective units of which:
- nine (9) units must be selected from the electives listed below, with no more than three (3) units from Group D
- three (3) units may be selected from the remaining listed electives or any currently endorsed training package qualification or accredited course at Certificate IV, Diploma or Advanced Diploma.
For specialisation in Sound Production:
- six (6) elective units must be selected from Group B
- three (3) units must be selected from Groups A, B, C or D
- three (3) units may be selected from the remaining listed electives or, if not listed, any currently endorsed training package qualification or accredited course at Certificate IV, Diploma or Advanced Diploma.
Refer to the Implementation Guide for details about choosing electives to support specialisations.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid vocational outcome.
- four (4) core units plus
- twelve (12) elective units of which:
- nine (9) units must be selected from the electives listed below, with no more than three (3) units from Group D
- three (3) units may be selected from the remaining listed electives or any currently endorsed training package qualification or accredited course at Certificate IV, Diploma or Advanced Diploma.
For specialisation in Sound Production:
- six (6) elective units must be selected from Group B
- three (3) units must be selected from Groups A, B, C or D
- three (3) units may be selected from the remaining listed electives or, if not listed, any currently endorsed training package qualification or accredited course at Certificate IV, Diploma or Advanced Diploma.
Refer to the Implementation Guide for details about choosing electives to support specialisations.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid vocational outcome.
1. Core Units
All four (4) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AWH20 | CUAPPR505 | Establish and maintain safe creative practice | 25 | Unit of competency |
| AWJ56 | CUACMP501 | Manage copyright arrangements | 50 | Unit of competency |
| AUI70 | BSBCRT501 | Originate and develop concepts | 30 | Unit of competency |
| AWI72 | CUAIND402 | Provide freelance services | 30 | Unit of competency |
2. Group A Perfomance / Composition Elective Units
Up to six (6) units may be selected.
Please refer to the packaging rules for the full details of available options.
Please refer to the packaging rules for the full details of available options.
3. Group B Sound Production Elective Units
For specialisation in Sound Production, six (6) elective units must be selected from Group B.
Please refer to the packaging rules for the full details of available options.
Please refer to the packaging rules for the full details of available options.
4. Group C Business Elective Units
Up to six (6) units may be selected.
Please refer to the packaging rules for the full details of available options.
Please refer to the packaging rules for the full details of available options.
5. Group D General Elective Units
No more than three (3) units may be selected from Group D.
Please refer to the packaging rules for the full details of available options.
Please refer to the packaging rules for the full details of available options.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AC74 | Sound Production | Pathway |
Note
No information
Entry Requirements
Nil